gmacgrp_layer3_addr2_reg1

         
For IPv4 frames, the Layer 3 Address 2 Register 1 is reserved. For IPv6 frames, it contains Bits [95:64] of the 128-bit IP Source Address or Destination Address field.

Module Instance	Base Address	Register Address
`i_emac_emac0`	`0xFF800000`	`0xFF800448`
`i_emac_emac1`	`0xFF802000`	`0xFF802448`
`i_emac_emac2`	`0xFF804000`	`0xFF804448`

Size: 32

Offset: 0x448

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`l3a21` `RW 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`l3a21` `RW 0x0`

gmacgrp_layer3_addr2_reg1 Fields

Bit	Name	Description	Access	Reset
31:0	`l3a21`	When Bit 0 (L3PEN1) and Bit 2 (L3SAM1) are set in Register 268 (Layer 3 and Layer 4 Control Register 1), this field contains the value to be matched with Bits [95:64] of the IP Source Address field in the IPv6 frames. When Bit 0 (L3PEN1) and Bit 4 (L3DAM1) are set in Register 268 (Layer 3 and Layer 4 Control Register 1), this field contains value to be matched with Bits [95:64] of the IP Destination Address field in the IPv6 frames.	`RW`	`0x0`

Bit

Name

Description

Access

Reset

31:0

l3a21

When Bit 0 (L3PEN1) and Bit 2 (L3SAM1) are set in Register 268 (Layer 3 and Layer 4 Control Register 1), this field contains the value to be matched with Bits [95:64] of the IP Source Address field in the IPv6 frames.

When Bit 0 (L3PEN1) and Bit 4 (L3DAM1) are set in Register 268 (Layer 3 and Layer 4 Control Register 1), this field contains value to be matched with Bits [95:64] of the IP Destination Address field in the IPv6 frames.

RW

0x0