IC_DMA_CR

         Name: DMA Control Register
Size: 2 bits
Address Offset: 0x88
Read/Write Access: Read/Write
This register is only valid when DW_apb_i2c is configured
with a set of DMA Controller interface signals (IC_HAS_DMA = 1).
When DW_apb_i2c is not configured for DMA operation, this register
does not exist and writing to the register's address has no
effect and reading from this register address will return zero.
The register is used to enable the DMA Controller interface operation.
There is a separate bit for transmit and receive. This can be programmed
regardless of the state of IC_ENABLE.

Module Instance	Base Address	Register Address
`sdm_i_i2c_0_DW_apb_i2c_addr_block1`	`0xFF8D0100`	`0xFF8D0188`
`sdm_i_i2c_1_DW_apb_i2c_addr_block1`	`0xFF8D0200`	`0xFF8D0288`

Size: 32

Offset: 0x88

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`RSVD_IC_DMA_CR_2_31` `RO 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`RSVD_IC_DMA_CR_2_31` `RO 0x0`														`TDMAE` `RW 0x0`	`RDMAE` `RW 0x0`

IC_DMA_CR Fields

Bit

Name

Description

Access

Reset

31:2

RSVD_IC_DMA_CR_2_31

Reserved bits [31:1] - Read Only

RO

0x0

TDMAE

Transmit DMA Enable.
//This bit enables/disables the transmit FIFO DMA
channel.
0 = Transmit DMA disabled
1 = Transmit DMA enabled
Reset value: 0x0

Value	Description
0x0	transmit FIFO DMA channel disabled
0x1	Transmit FIFO DMA channel enabled

RW

0x0

RDMAE

Receive DMA Enable.
This bit enables/disables the receive FIFO DMA
channel.
0 = Receive DMA disabled
1 = Receive DMA enabled
Reset value: 0x0

Value	Description
0x0	Receive FIFO DMA channel disabled
0x1	Receive FIFO DMA channel enabled

RW

0x0