SERRLKUPA0

         Single-bit error address in LOOKUP TABLE for PORTA.
Valid flag bit. Valid bit indicates if the address in this register is current or stale.

IF IP is having a single decoder, VALID8 will be used
IF IP is having multiple decoder, The lowest decoder will be represented on VALID1 and the next will on VALID2.
It increases onward to VALID8.

Module Instance	Base Address	Register Address
`ecc_emac2_tx_ecc_registerBlock`	`0xFF8C1400`	`0xFF8C1490`

Size: 32

Offset: 0x90

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`VALID8` `RW 0x0`	`VALID7` `RW 0x0`	`VALID6` `RW 0x0`	`VALID5` `RW 0x0`	`VALID4` `RW 0x0`	`VALID3` `RW 0x0`	`VALID2` `RW 0x0`	`VALID1` `RW 0x0`	`Address` `RO 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Address` `RO 0x0`

SERRLKUPA0 Fields

Bit	Name	Description	Access	Reset
31	`VALID8`		`RW`	`0x0`
30	`VALID7`		`RW`	`0x0`
29	`VALID6`		`RW`	`0x0`
28	`VALID5`		`RW`	`0x0`
27	`VALID4`		`RW`	`0x0`
26	`VALID3`		`RW`	`0x0`
25	`VALID2`		`RW`	`0x0`
24	`VALID1`		`RW`	`0x0`
23:0	`Address`	Recent Single-bit error address. This register shows the address of the each single-bit error. RAM size will determine the maximum number of address bits. If ram size is 32 Kbytes, bit 30-16 will be reserved and read as zero.	`RO`	`0x0`