first_block_of_next_plane

         The starting block address of the next plane in a multi plane device.

Module Instance	Base Address	Register Address
`sdm_i_nand_config`	`0xFFA10000`	`0xFFA10270`

Size: 32

Offset: 0x270

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`value` `RW 0x1`

first_block_of_next_plane Fields

Bit	Name	Description	Access	Reset
15:0	`value`	This values informs the controller of the plane structure of the device. In case the device is a multi plane device and the value here is 1, the controller understands that the next plane starts from Block number 1 and in conjunction with the number of planes parameter can decide upon the distribution of blocks in a plane in the device.	`RW`	`0x1`

Bit

Name

Description

Access

Reset

15:0

value

This values informs the controller of the plane structure of the device.
                                           In case the device is a multi plane device and the value here is 1, the
                                           controller understands that the next plane starts from Block number 1 
                                           and in conjunction with the number of planes parameter can decide upon the
                                           distribution of blocks in a plane in the device.

RW

0x1