SFE
Shadow FIFO Enable
| Module Instance | Base Address | Register Address |
|---|---|---|
| i_uart_0_uart_address_block | 0xFFC02000 | 0xFFC02098 |
| i_uart_1_uart_address_block | 0xFFC02100 | 0xFFC02198 |
Size: 32
Offset: 0x98
Access: RW
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|
RSVD_SFE_31to1 RO 0x0 |
|||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
RSVD_SFE_31to1 RO 0x0 |
sfe RW 0x0 |
||||||||||||||
SFE Fields
| Bit | Name | Description | Access | Reset | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 31:1 | RSVD_SFE_31to1 |
Reserved bits [31:1] - Read Only |
RO | 0x0 | ||||||
| 0 | sfe |
Shadow FIFO Enable. This is a shadow register for the FIFO enable bit (FCR[0]). This can be used to remove the burden of having to store the previously written value to the FCR in memory and having to mask this value so that only the FIFO enable bit gets updated. This enables/disables the transmit (XMIT) and receive (RCVR) FIFO's. If this bit is set to zero (disabled) after being enabled then both the XMIT and RCVR controller portion of FIFO's will be reset.
|
RW | 0x0 |