flashcmdrddatalo
| Module Instance | Base Address | Register Address |
|---|---|---|
| i_qspi_qspiregs | 0xFF8D2000 | 0xFF8D20A0 |
Size: 32
Offset: 0xA0
Access: RO
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|
data RO 0x0 |
|||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
data RO 0x0 |
|||||||||||||||
flashcmdrddatalo Fields
| Bit | Name | Description | Access | Reset |
|---|---|---|---|---|
| 31:0 | data |
This is the data that is returned by the flash device for any status or configuration read operation carried out by triggering the event in the control register. The register will be valid when the polling bit in the control register is low. |
RO | 0x0 |