IC_CLR_INTR

         Name: Clear Combined and Individual Interrupt Register
Size: 1 bit
Address Offset: 0x40
Read/Write Access: Read

Module Instance	Base Address	Register Address
`sdm_i_i2c_0_DW_apb_i2c_addr_block1`	`0xFF8D0100`	`0xFF8D0140`
`sdm_i_i2c_1_DW_apb_i2c_addr_block1`	`0xFF8D0200`	`0xFF8D0240`

Size: 32

Offset: 0x40

Access: RO

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`RSVD_IC_CLR_INTR` `RO 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`RSVD_IC_CLR_INTR` `RO 0x0`															`CLR_INTR` `RO 0x0`

IC_CLR_INTR Fields

Bit	Name	Description	Access	Reset
31:1	`RSVD_IC_CLR_INTR`	Reserved bits - Read Only	`RO`	`0x0`
0	`CLR_INTR`	Read this register to clear the combined interrupt, all individual interrupts, and the IC_TX_ABRT_SOURCE register. This bit does not clear hardware clearable interrupts but software clearable interrupts. Refer to Bit 9 of the IC_TX_ABRT_SOURCE register for an exception to clearing IC_TX_ABRT_SOURCE. Reset value: 0x0	`RO`	`0x0`

Bit

Name

Description

Access

Reset

31:1

RSVD_IC_CLR_INTR

Reserved bits - Read Only

RO

0x0

CLR_INTR

Read this register to clear the combined interrupt,
all individual interrupts, and the IC_TX_ABRT_SOURCE register.
This bit does not clear hardware clearable interrupts but software
clearable interrupts. Refer to Bit 9 of the IC_TX_ABRT_SOURCE register
for an exception to clearing IC_TX_ABRT_SOURCE.
Reset value: 0x0

RO

0x0