DIEPTSIZ9

         Device IN Endpoint 9 Transfer Size Register

Module Instance	Base Address	Register Address
`i_usbotg_0_DWC_otg_intreg`	`0xFFB00000`	`0xFFB00A30`
`i_usbotg_1_DWC_otg_intreg`	`0xFFB40000`	`0xFFB40A30`

Size: 32

Offset: 0xA30

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`RESERVED` `RO 0x0`	`MC` `RW 0x0`		`PktCnt` `RW 0x0`										`XferSize` `RW 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`XferSize` `RW 0x0`

DIEPTSIZ9 Fields

Bit

Name

Description

Access

Reset

RESERVED

RESERVED

RO

0x0

30:29

MC

Applies to IN endpoints only.
For periodic IN endpoints, this field indicates the number of packets that must be transmitted per microframe on the USB. The core uses this field to calculate the data PID for isochronous IN endpoints. 
  2'b01: 1 packet 
  2'b10: 2 packets 
  2'b11: 3 packets 
For non-periodic IN endpoints, this field is valid only in Internal DMA mode. It specifies the number of packets the core must fetchfor an IN endpoint before it switches to the endpoint pointed to by the Next Endpoint field of the Device Endpoint-n Control register (DIEPCTLn.NextEp)

Value	Description
0x1	1 packet
0x2	2 packets
0x3	3 packets

RW

0x0

28:19

PktCnt

Packet Count (PktCnt)
Indicates the total number of USB packets that constitute the
Transfer Size amount of data For endpoint 0.
This field is decremented every time a packet (maximum size or
short packet) is read from the TxFIFO.

RW

0x0

18:0

XferSize

Transfer Size (XferSize)
Indicates the transfer size in bytes For endpoint 0. The core
interrupts the application only after it has exhausted the transfer
size amount of data. The transfer size can be Set to the
maximum packet size of the endpoint, to be interrupted at the
end of each packet.
The core decrements this field every time a packet from the
external memory is written to the TxFIFO.

RW

0x0