bypass

         Contains fields that control bypass for clocks derived from the Peripheral PLL.
1: The clock is bypassed.
0: The clock is derived from the 5:1 active mux.

Module Instance	Base Address	Register Address
`i_clk_mgr_perpllgrp`	`0xFFD1007C`	`0xFFD10088`

Size: 32

Offset: 0xC

Access: RW

Access mode: PRIVILEGEMODE

Note: The processor must make a privileged bus access to this register. You can configure processor mode settings in the control registers of the ARM Cortex-A53 MPcore processor. For more information about processor modes, please refer to the ARM Infocenter.

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`									`psiref` `RW 0x1`	`s2fuser1` `RW 0x1`	`sdmmc` `RW 0x1`	`gpiodb` `RW 0x1`	`emacptp` `RW 0x1`	`emacb` `RW 0x1`	`emaca` `RW 0x1`

bypass Fields

Bit	Name	Description	Access	Reset
6	`psiref`	If set, the psi_ref_clk will be bypassed to the input clock reference of the Peripheral PLL.	`RW`	`0x1`
5	`s2fuser1`	If set, the s2f_user1_clk will be bypassed to the input clock reference of the Peripheral PLL.	`RW`	`0x1`
4	`sdmmc`	If set, the sdmmc_clk will be bypassed to the input clock reference of the Peripheral PLL.	`RW`	`0x1`
3	`gpiodb`	If set, the gpio_db_clk will be bypassed to the input clock reference of the Peripheral PLL.	`RW`	`0x1`
2	`emacptp`	If set, the emac_ptp_clk will be bypassed to the input clock reference of the Peripheral PLL.	`RW`	`0x1`
1	`emacb`	If set, the emacb_free_clk will be bypassed to the input clock reference of the Main PLL.	`RW`	`0x1`
0	`emaca`	If set, the emaca_free_clk will be bypassed to the input clock reference of the Main PLL.	`RW`	`0x1`