ECC_DECSTAT
Diagnostic decoder status
| Module Instance | Base Address | Register Address |
|---|---|---|
| soc_hmc_adp_csr_inst_0_ocp_slv_block | 0xF8011000 | 0xF8011154 |
Size: 32
Offset: 0x154
Access: RW
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|
Reserved |
DEC7DERRFLG 0x0 |
DEC6DERRFLG 0x0 |
DEC5DERRFLG 0x0 |
DEC4DERRFLG 0x0 |
DEC7ADDRFLG 0x0 |
DEC6ADDRFLG 0x0 |
DEC5ADDRFLG 0x0 |
DEC4ADDRFLG 0x0 |
DEC7SERRFLG 0x0 |
DEC6SERRFLG 0x0 |
DEC5SERRFLG 0x0 |
DEC4SERRFLG 0x0 |
|||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
Reserved |
DEC3DERRFLG 0x0 |
DEC2DERRFLG 0x0 |
DEC1DERRFLG 0x0 |
DEC0DERRFLG 0x0 |
DEC3ADDRFLG 0x0 |
DEC2ADDRFLG 0x0 |
DEC1ADDRFLG 0x0 |
DEC0ADDRFLG 0x0 |
DEC3SERRFLG 0x0 |
DEC2SERRFLG 0x0 |
DEC1SERRFLG 0x0 |
DEC0SERRFLG 0x0 |
|||
ECC_DECSTAT Fields
| Bit | Name | Description | Access | Reset |
|---|---|---|---|---|
| 27 | DEC7DERRFLG |
indicates decoder for data [511:448] has detected DBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a double-bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit. Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 26 | DEC6DERRFLG |
indicates decoder for data [447:384] has detected DBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a double-bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 25 | DEC5DERRFLG |
indicates decoder for data [383:320] has detected DBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a double-bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 24 | DEC4DERRFLG |
indicates decoder for data [319:256] has detected DBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a double-bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit. Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 23 | DEC7ADDRFLG |
indicates decoder for data [511:448] has detected address error. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected an address mismatch error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears.Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 22 | DEC6ADDRFLG |
indicates decoder for data [447:384] has detected address error. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected an address mismatch error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears.Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 21 | DEC5ADDRFLG |
indicates decoder for data [383:320] has detected address error. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected an address mismatch error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears.Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 20 | DEC4ADDRFLG |
indicates decoder for data [319:256] has detected address error. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected an address mismatch error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears.Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 19 | DEC7SERRFLG |
indicates decoder for data [511:448] has detected SBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a single bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 18 | DEC6SERRFLG |
indicates decoder for data [447:384] has detected SBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a single bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 17 | DEC5SERRFLG |
indicates decoder for data [383:320] has detected SBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a single bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit. Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 16 | DEC4SERRFLG |
indicates decoder for data [319:256] has detected SBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a single bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit. Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 11 | DEC3DERRFLG |
indicates decoder for data [255:192] has detected DBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a double-bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit. Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 10 | DEC2DERRFLG |
indicates decoder for data [191:128] has detected DBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a double-bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 9 | DEC1DERRFLG |
indicates decoder for data [127:64] has detected DBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a double-bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 8 | DEC0DERRFLG |
indicates decoder for data [63:0] has detected DBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a double-bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit. Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 7 | DEC3ADDRFLG |
indicates decoder for data [255:192] has detected address error. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected an address mismatch error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears.Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 6 | DEC2ADDRFLG |
indicates decoder for data [191:128] has detected address error. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected an address mismatch error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears.Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 5 | DEC1ADDRFLG |
indicates decoder for data [127:64] has detected address error. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected an address mismatch error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears.Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 4 | DEC0ADDRFLG |
indicates decoder for data [63:0] has detected address error. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected an address mismatch error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears.Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 3 | DEC3SERRFLG |
indicates decoder for data [255:192] has detected SBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a single bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 2 | DEC2SERRFLG |
indicates decoder for data [191:128] has detected SBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a single bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit.Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 1 | DEC1SERRFLG |
indicates decoder for data [127:64] has detected SBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a single bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit. Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |
| 0 | DEC0SERRFLG |
indicates decoder for data [63:0] has detected SBE. 1'b0: No error has been captured with this flag. 1'b1: Decoder 0 detected a single bit error. This flag will be set by the hardware and it will be cleared by the writing 1. This flag will be set till SW clears. Additional errors will not change the state of this bit. Error flag is set on the first beat of erred data. This won't be reset by the ecc_en bit. |
RW | 0x0 |