tcwaw_and_addr_2_data

Module Instance	Base Address	Register Address
`i_nand_config`	`0xFFB80000`	`0xFFB80110`

Size: 32

Offset: 0x110

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`		`tcwaw` `RW 0x14`						`Reserved`	`addr_2_data` `RW 0x32`

tcwaw_and_addr_2_data Fields

Bit	Name	Description	Access	Reset
13:8	`tcwaw`	Signifies the number of controller clocks that should be introduced between the command cycle of a random data input command to the address cycle of the random data input command.	`RW`	`0x14`
6:0	`addr_2_data`	Signifies the number of bus interface clk_x clocks that should be introduced between an address to a data input cycle. The number of clocks is the function of device parameter Tadl and controller clock frequency.	`RW`	`0x32`

Bit

Name

Description

Access

Reset

13:8

tcwaw

Signifies the number of controller clocks that should be introduced between 
                  the command cycle of a random data input command to the address cycle of the random
                  data input command.

RW

0x14

6:0

addr_2_data

Signifies the number of bus interface clk_x clocks that should be introduced 
                  between an address to a data input cycle. The number of clocks is the function of device 
                  parameter Tadl and controller clock frequency.

RW

0x32