IDINTEN 

         
Name: Internal DMAC Interrupt Enable Register
Size: 32 bits
Address Offset: 0x90
Read/Write access: read/write
Module Instance Base Address Register Address
i_sdmmc_sdmmc_block_0 0xFF808000 0xFF808090

Size: 32

Offset: 0x90

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

AI

RW 0x0

NI

RW 0x0

Reserved

CES

RW 0x0

DU

RW 0x0

Reserved

FBE

RW 0x0

RI

RW 0x0

TI

RW 0x0

IDINTEN Fields

Bit Name Description Access Reset
9 AI 
Abnormal Interrupt Summary Enable. When set, an abnormal interrupt is enabled. This bit enables the following bits:
                                                 ■ IDINTEN[2] - Fatal Bus Error Interrupt
                                                 ■ IDINTEN[4] -  DU Interrupt
Value Description
0x0 An abnormal interrupt is disabled
0x1 An abnormal interrupt is enabled
RW 0x0
8 NI 
Normal Interrupt Summary Enable. When set, a normal interrupt is enabled. When reset, a normal interrupt is disabled. This bit enables the following bits:
                                                 ■ IDINTEN[0] - Transmit Interrupt
                                                 ■ IDINTEN[1] - Receive Interrupt
Value Description
0x0 A normal interrupt is disabled
0x1 A normal interrupt is enabled
RW 0x0
5 CES 
Card Error summary Interrupt Enable. When set, it enables the Card Interrupt summary.
Value Description
0x0 The Card Interrupt summary is disabled
0x1 The Card Interrupt summary is enabled
RW 0x0
4 DU 
Descriptor Unavailable Interrupt. When set along with Abnormal Interrupt Summary Enable, the DU interrupt is enabled.
Value Description
0x0 The Descriptor Unavailable interrupt is disabled
0x1 When set along with Abnormal Interrupt Summary Enable, the Descriptor Unavailable interrupt is enabled
RW 0x0
2 FBE 
Fatal Bus Error Enable. When set with Abnormal Interrupt Summary Enable, the Fatal Bus Error Interrupt is enabled. When reset, Fatal Bus Error Enable Interrupt is disabled.
Value Description
0x0 Fatal Bus Error Enable Interrupt is disabled
0x1 When set with Abnormal Interrupt Summary Enable, the Fatal Bus Error Interrupt is enabled
RW 0x0
1 RI 
Receive Interrupt Enable. When set with Normal Interrupt Summary Enable, Receive Interrupt is enabled. When reset, Receive Interrupt is disabled.
Value Description
0x0 Receive Interrupt is disabled
0x1 When set with Normal Interrupt Summary Enable, Receive Interrupt is enabled
RW 0x0
0 TI 
Transmit Interrupt Enable. When set with Normal Interrupt Summary Enable, Transmit Interrupt is enabled. When reset, Transmit Interrupt is disabled.
Value Description
0x0 Transmit Interrupt is disabled
0x1 When set with Normal Interrupt Summary Enable, Transmit Interrupt is enabled
RW 0x0