sdm_NAND_dma Address Map

Module Instance	Base Address	End Address
`sdm_i_nand_dma`	`0xFFA10700`	`0xFFA107D3`

Register	Offset	Width	Access	Reset Value	Description
`dma_enable`	`0x0`	`32`	`RW`	`0x00000000`
`dma_intr`	`0x20`	`32`	`RW`	`0x00000000`	DMA interrupt register
`dma_intr_en`	`0x30`	`32`	`RW`	`0x00000000`	Enables corresponding interrupt bit in dma interrupt register
`target_err_addr_lo`	`0x40`	`32`	`RO`	`0x00000000`	Transaction address for which controller initiator interface received an ERROR target response.
`target_err_addr_hi`	`0x50`	`32`	`RO`	`0x00000000`	Transaction address for which controller initiator interface received an ERROR target response.
`flash_burst_length`	`0x70`	`32`	`RW`	`0x00000001`
`chip_interleave_enable_and_allow_int_reads`	`0x80`	`32`	`RW`	`0x00000110`
`no_of_blocks_per_lun`	`0xA0`	`32`	`RW`	`0x0000000F`
`lun_status_cmd`	`0xB0`	`32`	`RW`	`0x00007878`	Indicates the command to be sent while checking status of the next LUN.
`chnl_active`	`0x60`	`32`	`RO`	`0x00000000`	Indicates CMD-DMA channel activity status
`cmd_dma_channel_error`	`0xC0`	`32`	`RW`	`0x00000000`	Bits indicating CMD-DMA channel receiving an error condition. To get more information on the error, s/w needs to read the status field of the descriptor.
`cmd_dma_channel_error_en`	`0xD0`	`32`	`RW`	`0x00000000`	Enable bits indicating CMD-DMA channel receiving an error condition. To get more information on the error, s/w needs to read the status field of the descriptor.
`rescan_buffer_flag`	`0x90`	`32`	`RW`	`0x00000000`	Rescan buffer flag.