gmacgrp_mac_address120_high

         <b> Register 719 (MAC Address120 High Register)</b>
  

The MAC Address120 High register holds the upper 16 bits of the 6-byte 121st MAC address of the station.

If the MAC address registers are configured to be double-synchronized to the (G)MII clock domains, then
the synchronization is triggered only when Bits[31:24] (in little-endian mode) or Bits[7:0] (in big-endian mode) of the MAC Address120 Low Register are written. For proper synchronization updates, consecutive writes to this MAC Address120 Low Register must be performed after at least four clock cycles in the destination clock domain.

Module Instance	Base Address	Register Address
`i_emac_emac0`	`0xFF800000`	`0xFF800B40`
`i_emac_emac1`	`0xFF802000`	`0xFF802B40`
`i_emac_emac2`	`0xFF804000`	`0xFF804B40`

Size: 32

Offset: 0xB40

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`ae` `RW 0x0`	`reserved_30_16` `RO 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`addrhi` `RW 0xFFFF`

gmacgrp_mac_address120_high Fields

Bit

Name

Description

Access

Reset

ae

Address Enable

When this bit is set, the address filter module uses the 121st MAC address for perfect filtering. 
When this bit is reset, the address filter module ignores the address for filtering.

Value	Description
0x0	DISABLED
0x1	ENABLED

RW

0x0

30:16

reserved_30_16

Reserved

RO

0x0

15:0

addrhi

MAC Address120 [47:32]

This field contains the upper 16 bits (47:32) of the 6-byte 121st MAC address.

RW

0xFFFF