ccu_ios_I_main_QosGenerator_Priority

         Priority register.

Module Instance	Base Address	Register Address
`i_noc_ccu_ios_ccu_ios_I_main_QosGenerator`	`0xFFD24000`	`0xFFD24008`

Size: 32

Offset: 0x8

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`MARK` `RO 0x1`	`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`						`P1` `RW 0x2`		`Reserved`						`P0` `RW 0x0`

ccu_ios_I_main_QosGenerator_Priority Fields

Bit	Name	Description	Access	Reset
31	`MARK`	Backward compatibility marker when 0.	`RO`	`0x1`
9:8	`P1`	In Programmable or Bandwidth Limiter mode, the priority level for read transactions. In Bandwidth regulator mode, the priority level when the used throughput is below the threshold. In Bandwidth Regulator mode, P1 should have a value equal or greater than P0.	`RW`	`0x2`
1:0	`P0`	In Programmable or Bandwidth Limiter mode, the priority level for write transactions. In Bandwidth Regulator mode, the priority level when the used throughput is above the threshold. In Bandwidth Regulator mode, P0 should have a value equal or lower than P1.	`RW`	`0x0`

Bit

Name

Description

Access

Reset

MARK

Backward compatibility marker when 0.

RO

0x1

9:8

P1

In Programmable or Bandwidth Limiter mode, the priority level for read transactions. In Bandwidth regulator mode, the priority level when the used throughput is below the threshold. In Bandwidth Regulator mode, P1 should have a value equal or greater than P0.

RW

0x2

1:0

P0

In Programmable or Bandwidth Limiter mode, the priority level for write transactions. In Bandwidth Regulator mode, the priority level when the used throughput is above the threshold. In Bandwidth Regulator mode, P0 should have a value equal or lower than P1.

RW

0x0