re_2_re

         Timing parameter between re high to re low (Trhz) for the next bank

Module Instance	Base Address	Register Address
`i_nand_config`	`0xFFB80000`	`0xFFB80290`

Size: 32

Offset: 0x290

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`										`value` `RW 0x32`

re_2_re Fields

Bit	Name	Description	Access	Reset
5:0	`value`	Signifies the number of bus interface clk_x clocks that should be introduced between read enable going high to a bank to the read enable going low to the next bank. The number of clocks is the function of device parameter Trhz and controller clock frequency.	`RW`	`0x32`

Bit

Name

Description

Access

Reset

5:0

value

Signifies the number of bus interface clk_x clocks that should be introduced between 
                          read enable going high to a bank to the read enable going low to the next bank. The number 
                          of clocks is the function of device parameter Trhz and controller clock frequency.

RW

0x32