nand_l3master
Controls the L3 master ARCACHE and AWCACHE AXI signals.
These register bits should be updated only during system initialization prior to removing the peripheral from reset. They may not be changed dynamically during peripheral operation
All fields are reset by a cold or warm reset.
Module Instance | Base Address | Register Address |
---|---|---|
i_sys_mgr_core | 0xFFD12000 | 0xFFD12034 |
Size: 32
Offset: 0x34
Access: RW
Access mode: PRIVILEGEMODE | SECURE
Note: The processor must make a secure, privileged bus access to this register. You can configure processor mode settings in the control registers of the ARM Cortex-A53 MPcore processor. For more information about processor modes, please refer to the ARM Infocenter.
Bit Fields | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
Reserved |
arprot RW 0x0 |
Reserved |
awprot RW 0x0 |
||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Reserved |
ardomain RW 0x3 |
Reserved |
awdomain RW 0x3 |
awcache_0 RW 0x0 |
arcache_0 RW 0x0 |
nand_l3master Fields
Bit | Name | Description | Access | Reset | ||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
22:20 | arprot |
ar prot register |
RW | 0x0 | ||||||||||||||||||||||||||||||||||
18:16 | awprot |
aw prot register |
RW | 0x0 | ||||||||||||||||||||||||||||||||||
13:12 | ardomain |
ar domain register |
RW | 0x3 | ||||||||||||||||||||||||||||||||||
9:8 | awdomain |
aw domain register |
RW | 0x3 | ||||||||||||||||||||||||||||||||||
7:4 | awcache_0 |
Specifies the value of the module AWCACHE signal.
|
RW | 0x0 | ||||||||||||||||||||||||||||||||||
3:0 | arcache_0 |
Specifies the value of the module ARCACHE signal.
|
RW | 0x0 |