IC_CLR_GEN_CALL
Name: Clear GEN_CALL Interrupt Register
Size: 1 bit
Address Offset: 0x68
Read/Write Access: Read
| Module Instance | Base Address | Register Address |
|---|---|---|
| sdm_i_i2c_0_DW_apb_i2c_addr_block1 | 0xFF8D0100 | 0xFF8D0168 |
| sdm_i_i2c_1_DW_apb_i2c_addr_block1 | 0xFF8D0200 | 0xFF8D0268 |
Size: 32
Offset: 0x68
Access: RO
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|
RSVD_IC_CLR_GEN_CALL RO 0x0 |
|||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
RSVD_IC_CLR_GEN_CALL RO 0x0 |
CLR_GEN_CALL RO 0x0 |
||||||||||||||
IC_CLR_GEN_CALL Fields
| Bit | Name | Description | Access | Reset |
|---|---|---|---|---|
| 31:1 | RSVD_IC_CLR_GEN_CALL |
Reserved bits - Read Only |
RO | 0x0 |
| 0 | CLR_GEN_CALL |
Read this register to clear the GEN_CALL interrupt (bit 11) of IC_RAW_INTR_STAT register. Reset value: 0x0 |
RO | 0x0 |