dmaper
Module Instance Base Address Register Address
i_qspi_qspiregs 0xFF8D2000 0xFF8D2020

Size: 32

Offset: 0x20

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

dma_periph_resv2_fld

RO 0x0

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

dma_periph_resv2_fld

RO 0x0

numburstreqbytes

RW 0x0

dma_periph_resv1_fld

RO 0x0

numsglreqbytes

RW 0x0

dmaper Fields

Bit Name Description Access Reset
31:12 dma_periph_resv2_fld 


                     		

                     
                        RO
                     

                     
                        0x0
                     

                  


                  

                     11:8

                     
                        numburstreqbytes
                     

                     
                        
 Number of bytes in a burst type request on the DMA peripheral request. A programmed value of 0 represents a single byte. This should be setup before starting the indirect read or write operation. The actual number of bytes used is 2**(value in this register) which will simplify implementation. 


                     		

                     
                        RW
                     

                     
                        0x0
                     

                  


                  

                     7:4

                     
                        dma_periph_resv1_fld
                     

                     
                        


                     		

                     
                        RO
                     

                     
                        0x0
                     

                  


                  

                     3:0

                     
                        numsglreqbytes
                     

                     
                        
 Number of bytes in a single type request on the DMA peripheral request. A programmed value of 0 represents a single byte. This should be setup before starting the indirect read or write operation. The actual number of bytes used is 2**(value in this register) which will simplify implementation. 


                     		

                     
                        RW
                     

                     
                        0x0