Visible to Intel only — GUID: zgc1566295620939
Ixiasoft
4.6.1. Launching and Setting Up the Fault Injection Debugger
4.6.2. Configuring Your Device using a Software Object File (.sof)
4.6.3. Constraining Regions for Fault Injection
4.6.4. Injecting Errors to Predefined Safe Locations
4.6.5. Blowing Fuse Bit to Enable Injecting All Error Types
4.6.6. Injecting Errors to Random Locations
4.6.7. Injecting Errors to Specific Locations
4.6.8. Injecting Double Adjacent Errors
4.6.9. Injecting SDM ECC Errors
Visible to Intel only — GUID: zgc1566295620939
Ixiasoft
4.6.1. Launching and Setting Up the Fault Injection Debugger
To use the Fault Injection Debugger tool, connect it to the device through the JTAG interface and configure the JTAG chain.
Figure 12. Fault Injection Debugger Window
- From the Quartus® Prime main menu, select Tools > Fault Injection Debugger.
- In the Programmer Fault Injection Debugger window, click Hardware Setup.
The Hardware Setup windows displays the programming hardware connected to your computer.
- Select the programming hardware you want to use.
- Click Close.
- In the Programmer Fault Injection Debugger window, click Auto Detect.
The Auto Detect command populates the device chain with the programmable devices found in the JTAG chain.