Visible to Intel only — GUID: atg1473369782562
Ixiasoft
1.1. What's New In This Version
1.2. Partial Reconfiguration Terminology
1.3. Partial Reconfiguration Process Sequence
1.4. Internal Host Partial Reconfiguration
1.5. External Host Partial Reconfiguration
1.6. Partial Reconfiguration Design Flow
1.7. Partial Reconfiguration Design Considerations
1.8. Hierarchical Partial Reconfiguration
1.9. Partial Reconfiguration Design Timing Analysis
1.10. Partial Reconfiguration Design Simulation
1.11. Partial Reconfiguration Design Debugging
1.12. Partial Reconfiguration Security ( Stratix® 10 Designs)
1.13. PR Bitstream Compression and Encryption ( Arria® 10 and Cyclone® 10 GX Designs)
1.14. Avoiding PR Programming Errors
1.15. Exporting a Version-Compatible Compilation Database for PR Designs
1.16. Creating a Partial Reconfiguration Design Revision History
1.6.1. Step 1: Identify Partial Reconfiguration Resources
1.6.2. Step 2: Create Design Partitions
1.6.3. Step 3: Floorplan the Design
1.6.4. Step 4: Add the Partial Reconfiguration Controller Intel® FPGA IP
1.6.5. Step 5: Define Personas
1.6.6. Step 6: Create Revisions for Personas
1.6.7. Step 7: Compile the Base Revision and Export the Static Region
1.6.8. Step 8: Setup PR Implementation Revisions
1.6.9. Step 9: Program the FPGA Device
1.6.9.1. Generating PR Bitstream Files
1.6.9.2. Generating PR Bitstream Files
1.6.9.3. Partial Reconfiguration Bitstream Compatibility Checking
1.6.9.4. Raw Binary Programming File Byte Sequence Transmission Examples
1.6.9.5. Generating a Merged .pmsf File from Multiple .pmsf Files ( Arria® 10 and Cyclone® 10 GX Designs)
1.7.1. Partial Reconfiguration Design Guidelines
1.7.2. PR Design Timing Closure Best Practices
1.7.3. PR File Management
1.7.4. Evaluating PR Region Initial Conditions
1.7.5. Creating Wrapper Logic for PR Regions
1.7.6. Creating Freeze Logic for PR Regions
1.7.7. Resetting the PR Region Registers
1.7.8. Promoting Global Signals in a PR Region
1.7.9. Planning Clocks and other Global Routing
1.7.10. Implementing Clock Enable for On-Chip Memories
2.1. Internal and External PR Host Configurations
2.2. Partial Reconfiguration Controller Intel FPGA IP
2.3. Partial Reconfiguration Controller Intel Arria® 10/Cyclone® 10 FPGA IP
2.4. Partial Reconfiguration External Configuration Controller Intel FPGA IP
2.5. Partial Reconfiguration Region Controller Intel® FPGA IP
2.6. Avalon® Memory-Mapped Partial Reconfiguration Freeze Bridge IP
2.7. Avalon® Streaming Partial Reconfiguration Freeze Bridge IP
2.8. Generating and Simulating Intel® FPGA IP
2.9. Quartus® Prime Pro Edition User Guide: Partial Reconfiguration Archive
2.10. Partial Reconfiguration Solutions IP User Guide Revision History
2.3.1. Agent Interface
2.3.2. Reconfiguration Sequence
2.3.3. Interrupt Interface
2.3.4. Parameters
2.3.5. Ports
2.3.6. Timing Specifications
2.3.7. PR Control Block and CRC Block Verilog HDL Manual Instantiation
2.3.8. PR Control Block and CRC Block VHDL Manual Instantiation
2.3.9. PR Control Block Signals
2.3.10. Configuring an External Host for Arria® 10 or Cyclone® 10 GX Designs
2.8.1. Specifying the IP Parameters and Options ( Quartus® Prime Pro Edition)
2.8.2. Running the Freeze Bridge Update script
2.8.3. IP Core Generation Output ( Quartus® Prime Pro Edition)
2.8.4. Arria® 10 and Cyclone® 10 GX PR Control Block Simulation Model
2.8.5. Generating the PR Persona Simulation Model
2.8.6. Secure Device Manager Partial Reconfiguration Simulation Model
Visible to Intel only — GUID: atg1473369782562
Ixiasoft
2.3.8.1. PR Control Block and CRC Block VHDL Component Declaration
The following example shows manual instantiation of the PR control block and the CRC block in your Arria® 10 PR design:
- Use the code sample below, containing the component declaration in VHDL. This code performs the PR function from within the core (code block within Core_Top).
module Chip_Top is port ( --User I/O signals (excluding signals that relate to PR) .. .. ) -- Following shows the connectivity within the Chip_Top module Core_Top : Core_Top port_map ( .. .. ); m_pr : twentynm_prblock port map( clk => dclk, corectl =>'1', --1 - when using PR from inside --0 - for PR from pins; You must also enable -- the appropriate option in Quartus Prime settings prrequest => pr_request, data => pr_data, error => pr_error, ready => pr_ready, done => pr_done ); m_crc : twentynm_crcblock port map( shiftnld => '1', --If you want to read the EMR register when clk => dummy_clk, --error occurrs, refer to AN539 for the --connectivity forthis signal. If you only want --to detect CRC errors, but plan to take no --further action, you can tie the shiftnld --signal to logical high. crcerror => crc_error );
Note: This VHDL example is adaptable for Verilog HDL instantiation. - Add additional ports to Core_Top to connect to both components.
- Follow these rules when connecting the PR control block to the rest of your design:
- Set the corectl signal to ‘1’ (when using partial reconfiguration from core) or to ‘0’ (when using partial reconfiguration from pins).
- The corectl signal must match the Enable PR pins option setting in the Device and Pin Options dialog box (Assignments > Device > Device and Pin Options).
- When performing partial reconfiguration from pins, the Fitter automatically assigns the PR unassigned pins. Assign all the dedicated PR pins using Pin Planner ( Assignments > Pin Planner) or Assignment Editor (Assignments > Assignment Editor).
- When performing partial reconfiguration from the core logic, connect the prblock signals to either core logic or I/O pins, excluding the dedicated programming pin, such as DCLK.