Visible to Intel only — GUID: pra1464305805759
Ixiasoft
1.6. Running the Reference Design
The reference design has the following hardware and software requirements:
Hardware Requirements
- The FPGA Development Kit
- A computer with a PCIe slot running Windows or either 32- or 64 bit Linux.This computer is referred as computer number 1.
- A second computer with the Quartus® Prime software installed or a computer running 64-bit Windows. This computer downloads the SRAM Object File (*.sof) to the FPGA on the development board. This computer is referred as computer number 2.
- A USB cable or other download cable.
Software Requirements
- The reference design software installed on computer number 1.
- The Quartus® Prime software installed on computer number 2.
- Arria® V, Cyclone V® , and Stratix® V: require Quartus® Prime Standard Edition, version 15.1 or later
- Arria 10: requires Quartus® Prime Standard or Pro Edition, version 16.0 or later
- Startix 10: requires Quartus® Prime Pro Edition, version 17.1IR1 or later
Section Content
Installing the Driver and Application
Installing the Windows Software
Installing the Hardware
Running the Software
Peak Throughput
Related Information