Description

The host may hang or report a PCIe failure after a flash failover has occurred. This issue can be seen when the user image in flash is corrupted and the configuration subsystem loads the factory image into the FPGA.

Workaround

Follow the instructions in the Updating Flash Using the Intel® Quartus® Prime Pro Edition Programmer section in the Intel® Acceleration Stack Quick Start Guide for Intel® Programmable Acceleration Card with Intel® Arria® 10 GX FPGA . If the issue persists, contact your local field representative.

Status

Affects: Intel® Acceleration Stack 1.0 Production and 1.1 Production

Status: No planned fix