Quartus® Prime Pro Edition User Guide: Design Optimization

ID 683641
Date 7/08/2024
Public
Document Table of Contents

4.2.3.2. Guideline: Optimize Synthesis for Area, Not Speed

If the Fitter cannot resolve a design due to limitations in logic resources, resynthesize the design to improve the area utilization.

First, ensure that the device and timing constraints are set correctly in the synthesis tool. Particularly when area utilization of the design is a concern, ensure that you do not over-constrain the timing requirements for the design. Synthesis tools try to meet the specified requirements, which can result in higher device resource usage if the constraints are too aggressive.

If resource utilization is an important concern, you can optimize for area instead of speed.

  • If you are using Quartus® Prime synthesis, click Assignments > Settings > Compiler Settings > Advanced Settings (Synthesis) and select Balanced or Area for the Optimization Technique.
  • The Aggressive Area Optimization Mode optimizes for area at the cost of performance.
  • If you want to reduce area for specific modules in the design using the Area or Speed setting while leaving the default Optimization Technique setting at Balanced, use the Assignment Editor.
  • In some synthesis tools, not specifying an fMAX requirement can result in less resource utilization.

Optimizing for area or speed can affect the register-to-register timing performance.

Note: In the Quartus® Prime software, the Balanced setting typically produces utilization results that are very similar to those produced by the Area setting, with better performance results. The Area setting can give better results in some cases.

The Quartus® Prime software provides additional attributes and options that can help improve the quality of the synthesis results.