Intel® Quartus® Prime Standard Edition User Guide: Design Recommendations

Download PDF
ID 683323
Date 9/24/2018
Public
Document Table of Contents
Document Table of Contents x
1. Recommended Design Practices 2. Recommended HDL Coding Styles 3. Managing Metastability with the Intel® Quartus® Prime Software A. Intel® Quartus® Prime Standard Edition User Guides
1. Recommended Design Practices x
1.1. Following Synchronous FPGA Design Practices 1.2. HDL Design Guidelines 1.3. Checking Design Violations 1.4. Use Clock and Register-Control Architectural Features 1.5. Implementing Embedded RAM 1.6. Recommended Design Practices Revision History
1.1. Following Synchronous FPGA Design Practices x
1.1.1. Implementing Synchronous Designs 1.1.2. Asynchronous Design Hazards
1.2. HDL Design Guidelines x
1.2.1. Optimizing Combinational Logic 1.2.2. Optimizing Clocking Schemes 1.2.3. Optimizing Physical Implementation and Timing Closure 1.2.4. Optimizing Power Consumption 1.2.5. Managing Design Metastability
1.2.1. Optimizing Combinational Logic x
1.2.1.1. Avoid Combinational Loops 1.2.1.2. Avoid Unintended Latch Inference 1.2.1.3. Avoid Delay Chains in Clock Paths 1.2.1.4. Use Synchronous Pulse Generators
1.2.2. Optimizing Clocking Schemes x
1.2.2.1. Register Combinational Logic Outputs 1.2.2.2. Avoid Asynchronous Clock Division 1.2.2.3. Avoid Ripple Counters 1.2.2.4. Use Multiplexed Clocks 1.2.2.5. Use Gated Clocks 1.2.2.6. Use Synchronous Clock Enables
1.2.2.5. Use Gated Clocks x
1.2.2.5.1. Recommended Clock-Gating Methods
1.2.3. Optimizing Physical Implementation and Timing Closure x
1.2.3.1. Planning Physical Implementation 1.2.3.2. Planning FPGA Resources 1.2.3.3. Optimizing for Timing Closure 1.2.3.4. Optimizing Critical Timing Paths
1.3. Checking Design Violations x
1.3.1. Validating Against Design Rules 1.3.2. Creating Custom Design Rules
1.3.2. Creating Custom Design Rules x
1.3.2.1. Custom Design Rule Examples
1.4. Use Clock and Register-Control Architectural Features x
1.4.1. Use Global Reset Resources 1.4.2. Use Global Clock Network Resources 1.4.3. Use Clock Region Assignments to Optimize Clock Constraints 1.4.4. Avoid Asynchronous Register Control Signals
1.4.1. Use Global Reset Resources x
1.4.1.1. Use Synchronous Resets 1.4.1.2. Using Asynchronous Resets 1.4.1.3. Use Synchronized Asynchronous Reset
1.4.3. Use Clock Region Assignments to Optimize Clock Constraints x
1.4.3.1. Clock Region Assignments in Intel® Arria® 10 and Older Device Families
2. Recommended HDL Coding Styles x
2.1. Using Provided HDL Templates 2.2. Instantiating IP Cores in HDL 2.3. Inferring Multipliers and DSP Functions 2.4. Inferring Memory Functions from HDL Code 2.5. Register and Latch Coding Guidelines 2.6. General Coding Guidelines 2.7. Designing with Low-Level Primitives 2.8. Recommended HDL Coding Styles Revision History
2.1. Using Provided HDL Templates x
2.1.1. Inserting HDL Code from a Provided Template
2.3. Inferring Multipliers and DSP Functions x
2.3.1. Inferring Multipliers 2.3.2. Inferring Multiply-Accumulator and Multiply-Adder Functions
2.4. Inferring Memory Functions from HDL Code x
2.4.1. Inferring RAM functions from HDL Code 2.4.2. Inferring ROM Functions from HDL Code 2.4.3. Inferring Shift Registers in HDL Code
2.4.1. Inferring RAM functions from HDL Code x
2.4.1.1. Use Synchronous Memory Blocks 2.4.1.2. Avoid Unsupported Reset and Control Conditions 2.4.1.3. Check Read-During-Write Behavior 2.4.1.4. Controlling RAM Inference and Implementation 2.4.1.5. Single-Clock Synchronous RAM with Old Data Read-During-Write Behavior 2.4.1.6. Single-Clock Synchronous RAM with New Data Read-During-Write Behavior 2.4.1.7. Simple Dual-Port, Dual-Clock Synchronous RAM 2.4.1.8. True Dual-Port Synchronous RAM 2.4.1.9. Mixed-Width Dual-Port RAM 2.4.1.10. RAM with Byte-Enable Signals 2.4.1.11. Specifying Initial Memory Contents at Power-Up
2.4.3. Inferring Shift Registers in HDL Code x
2.4.3.1. Simple Shift Register 2.4.3.2. Shift Register with Evenly Spaced Taps
2.5. Register and Latch Coding Guidelines x
2.5.1. Register Power-Up Values 2.5.2. Secondary Register Control Signals Such as Clear and Clock Enable 2.5.3. Latches
2.5.1. Register Power-Up Values x
2.5.1.1. Specifying a Power-Up Value
2.5.3. Latches x
2.5.3.1. Avoid Unintentional Latch Generation 2.5.3.2. Inferring Latches Correctly
2.6. General Coding Guidelines x
2.6.1. Tri-State Signals 2.6.2. Clock Multiplexing 2.6.3. Adder Trees 2.6.4. State Machine HDL Guidelines 2.6.5. Multiplexer HDL Guidelines 2.6.6. Cyclic Redundancy Check Functions 2.6.7. Comparator HDL Guidelines 2.6.8. Counter HDL Guidelines
2.6.3. Adder Trees x
2.6.3.1. Architectures with 4-Input LUTs in Logic Elements 2.6.3.2. Architectures with 6-Input LUTs in Adaptive Logic Modules
2.6.4. State Machine HDL Guidelines x
2.6.4.1. Verilog HDL State Machines 2.6.4.2. VHDL State Machines
2.6.4.1. Verilog HDL State Machines x
2.6.4.1.1. Verilog-2001 State Machine Coding Example 2.6.4.1.2. SystemVerilog State Machine Coding Example
2.6.4.2. VHDL State Machines x
2.6.4.2.1. VHDL State Machine Coding Example
2.6.5. Multiplexer HDL Guidelines x
2.6.5.1. Intel® Quartus® Prime Software Option for Multiplexer Restructuring 2.6.5.2. Multiplexer Types 2.6.5.3. Implicit Defaults in IF Statements 2.6.5.4. default or OTHERS CASE Assignment
2.6.5.2. Multiplexer Types x
2.6.5.2.1. Binary Multiplexers 2.6.5.2.2. Selector Multiplexers 2.6.5.2.3. Priority Multiplexers
2.6.6. Cyclic Redundancy Check Functions x
2.6.6.1. If Performance is Important, Optimize for Speed 2.6.6.2. Use Separate CRC Blocks Instead of Cascaded Stages 2.6.6.3. Use Separate CRC Blocks Instead of Allowing Blocks to Merge 2.6.6.4. Take Advantage of Latency if Available 2.6.6.5. Save Power by Disabling CRC Blocks When Not in Use 2.6.6.6. Initialize the Device with the Synchronous Load (sload) Signal
3. Managing Metastability with the Intel® Quartus® Prime Software x
3.1. Metastability Analysis in the Intel® Quartus® Prime Software 3.2. Metastability and MTBF Reporting 3.3. MTBF Optimization 3.4. Reducing Metastability Effects 3.5. Scripting Support 3.6. Managing Metastability 3.7. Managing Metastability with the Intel® Quartus® Prime Software Revision History
3.1. Metastability Analysis in the Intel® Quartus® Prime Software x
3.1.1. Synchronization Register Chains 3.1.2. Identify Synchronizers for Metastability Analysis 3.1.3. How Timing Constraints Affect Synchronizer Identification and Metastability Analysis
3.2. Metastability and MTBF Reporting x
3.2.1. Metastability Reports 3.2.2. Synchronizer Data Toggle Rate in MTBF Calculation
3.2.1. Metastability Reports x
3.2.1.1. MTBF Summary Report 3.2.1.2. Synchronizer Summary Report 3.2.1.3. Synchronizer Chain Statistics Report in the Timing Analyzer
3.2.1.1. MTBF Summary Report x
3.2.1.1.1. Typical and Worst-Case MTBF of Design 3.2.1.1.2. Synchronizer Chains 3.2.1.1.3. Increasing Available Settling Time
3.3. MTBF Optimization x
3.3.1. Synchronization Register Chain Length
3.4. Reducing Metastability Effects x
3.4.1. Apply Complete System-Centric Timing Constraints for the Timing Analyzer 3.4.2. Force the Identification of Synchronization Registers 3.4.3. Set the Synchronizer Data Toggle Rate 3.4.4. Optimize Metastability During Fitting 3.4.5. Increase the Length of Synchronizers to Protect and Optimize 3.4.6. Set Fitter Effort to Standard Fit instead of Auto Fit 3.4.7. Increase the Number of Stages Used in Synchronizers 3.4.8. Select a Faster Speed Grade Device
3.5. Scripting Support x
3.5.1. Identifying Synchronizers for Metastability Analysis 3.5.2. Synchronizer Data Toggle Rate in MTBF Calculation 3.5.3. report_metastability and Tcl Command 3.5.4. MTBF Optimization 3.5.5. Synchronization Register Chain Length
1. Recommended Design Practices
2. Recommended HDL Coding Styles
3. Managing Metastability with the Intel® Quartus® Prime Software
A. Intel® Quartus® Prime Standard Edition User Guides

2.6.4. State Machine HDL Guidelines

Synthesis tools can recognize and encode Verilog HDL and VHDL state machines during synthesis. This section presents guidelines to secure the best results when you use state machines.

Synthesis tools that can recognize a piece of code as a state machine can perform optimizations that improve the design area and performance. For example, the tool can recode the state variables to improve the quality of results, or optimize other parts of the design through known properties of state machines.

To achieve the best results, synthesis tools often use one-hot encoding for FPGA devices and minimal-bit encoding for CPLD devices, although the choice of implementation can vary for different state machines and different devices. Refer to the synthesis tool documentation for techniques to control the encoding of state machines.

To ensure proper recognition and inference of state machines and to improve the quality of results, observe the following guidelines for both Verilog HDL and VHDL:

  • Assign default values to outputs derived from the state machine so that synthesis does not generate unwanted latches.
  • Separate state machine logic from all arithmetic functions and datapaths, including assigning output values.
  • For designs in which more than one state perform the same operation, define the operation outside the state machine, and direct the output logic of the state machine to use this value.
  • Ensure a defined power-up state with a simple asynchronous or synchronous reset. In designs where the state machine contains more elaborate reset logic, such as both an asynchronous reset and an asynchronous load, the Intel® Quartus® Prime software infers regular logic rather than a state machine.

If a state machine enters an illegal state due to a problem with the device, the design likely ceases to function correctly until the next reset of the state machine. Synthesis tools do not provide for this situation by default. The same issue applies to any other registers if there is some fault in the system. A default or when others clause does not affect this operation, assuming that the design never deliberately enters this state. Synthesis tools remove any logic generated by a default state if it is not reachable by normal state machine operation.

Many synthesis tools (including Intel® Quartus® Prime integrated synthesis) have an option to implement a safe state machine. The Intel® Quartus® Prime software inserts extra logic to detect illegal states and force the state machine’s transition to the reset state. Safe state machines are useful when the state machine can enter an illegal state, for example, when a state machine has control inputs that originate in another clock domain, such as the control logic for a dual-clock FIFO.

This option protects state machines by forcing them into the reset state. All other registers in the design are not protected this way. As a best practice for designs with asynchronous inputs, use a synchronization register chain instead of relying on the safe state machine option.


Section Content
Verilog HDL State Machines
VHDL State Machines

Related Information
Level Two Title