Intel® Quartus® Prime Standard Edition User Guide: Design Recommendations

Download PDF
ID 683323
Date 9/24/2018
Public
Document Table of Contents
Document Table of Contents x
1. Recommended Design Practices 2. Recommended HDL Coding Styles 3. Managing Metastability with the Intel® Quartus® Prime Software A. Intel® Quartus® Prime Standard Edition User Guides
1. Recommended Design Practices x
1.1. Following Synchronous FPGA Design Practices 1.2. HDL Design Guidelines 1.3. Checking Design Violations 1.4. Use Clock and Register-Control Architectural Features 1.5. Implementing Embedded RAM 1.6. Recommended Design Practices Revision History
1.1. Following Synchronous FPGA Design Practices x
1.1.1. Implementing Synchronous Designs 1.1.2. Asynchronous Design Hazards
1.2. HDL Design Guidelines x
1.2.1. Optimizing Combinational Logic 1.2.2. Optimizing Clocking Schemes 1.2.3. Optimizing Physical Implementation and Timing Closure 1.2.4. Optimizing Power Consumption 1.2.5. Managing Design Metastability
1.2.1. Optimizing Combinational Logic x
1.2.1.1. Avoid Combinational Loops 1.2.1.2. Avoid Unintended Latch Inference 1.2.1.3. Avoid Delay Chains in Clock Paths 1.2.1.4. Use Synchronous Pulse Generators
1.2.2. Optimizing Clocking Schemes x
1.2.2.1. Register Combinational Logic Outputs 1.2.2.2. Avoid Asynchronous Clock Division 1.2.2.3. Avoid Ripple Counters 1.2.2.4. Use Multiplexed Clocks 1.2.2.5. Use Gated Clocks 1.2.2.6. Use Synchronous Clock Enables
1.2.2.5. Use Gated Clocks x
1.2.2.5.1. Recommended Clock-Gating Methods
1.2.3. Optimizing Physical Implementation and Timing Closure x
1.2.3.1. Planning Physical Implementation 1.2.3.2. Planning FPGA Resources 1.2.3.3. Optimizing for Timing Closure 1.2.3.4. Optimizing Critical Timing Paths
1.3. Checking Design Violations x
1.3.1. Validating Against Design Rules 1.3.2. Creating Custom Design Rules
1.3.2. Creating Custom Design Rules x
1.3.2.1. Custom Design Rule Examples
1.4. Use Clock and Register-Control Architectural Features x
1.4.1. Use Global Reset Resources 1.4.2. Use Global Clock Network Resources 1.4.3. Use Clock Region Assignments to Optimize Clock Constraints 1.4.4. Avoid Asynchronous Register Control Signals
1.4.1. Use Global Reset Resources x
1.4.1.1. Use Synchronous Resets 1.4.1.2. Using Asynchronous Resets 1.4.1.3. Use Synchronized Asynchronous Reset
1.4.3. Use Clock Region Assignments to Optimize Clock Constraints x
1.4.3.1. Clock Region Assignments in Intel® Arria® 10 and Older Device Families
2. Recommended HDL Coding Styles x
2.1. Using Provided HDL Templates 2.2. Instantiating IP Cores in HDL 2.3. Inferring Multipliers and DSP Functions 2.4. Inferring Memory Functions from HDL Code 2.5. Register and Latch Coding Guidelines 2.6. General Coding Guidelines 2.7. Designing with Low-Level Primitives 2.8. Recommended HDL Coding Styles Revision History
2.1. Using Provided HDL Templates x
2.1.1. Inserting HDL Code from a Provided Template
2.3. Inferring Multipliers and DSP Functions x
2.3.1. Inferring Multipliers 2.3.2. Inferring Multiply-Accumulator and Multiply-Adder Functions
2.4. Inferring Memory Functions from HDL Code x
2.4.1. Inferring RAM functions from HDL Code 2.4.2. Inferring ROM Functions from HDL Code 2.4.3. Inferring Shift Registers in HDL Code
2.4.1. Inferring RAM functions from HDL Code x
2.4.1.1. Use Synchronous Memory Blocks 2.4.1.2. Avoid Unsupported Reset and Control Conditions 2.4.1.3. Check Read-During-Write Behavior 2.4.1.4. Controlling RAM Inference and Implementation 2.4.1.5. Single-Clock Synchronous RAM with Old Data Read-During-Write Behavior 2.4.1.6. Single-Clock Synchronous RAM with New Data Read-During-Write Behavior 2.4.1.7. Simple Dual-Port, Dual-Clock Synchronous RAM 2.4.1.8. True Dual-Port Synchronous RAM 2.4.1.9. Mixed-Width Dual-Port RAM 2.4.1.10. RAM with Byte-Enable Signals 2.4.1.11. Specifying Initial Memory Contents at Power-Up Verilog HDL RAM with Initialized Contents Verilog HDL RAM Initialized with the readmemb Command VHDL RAM with Initialized Contents
2.4.3. Inferring Shift Registers in HDL Code x
2.4.3.1. Simple Shift Register 2.4.3.2. Shift Register with Evenly Spaced Taps
2.5. Register and Latch Coding Guidelines x
2.5.1. Register Power-Up Values 2.5.2. Secondary Register Control Signals Such as Clear and Clock Enable 2.5.3. Latches
2.5.1. Register Power-Up Values x
2.5.1.1. Specifying a Power-Up Value
2.5.3. Latches x
2.5.3.1. Avoid Unintentional Latch Generation 2.5.3.2. Inferring Latches Correctly
2.6. General Coding Guidelines x
2.6.1. Tri-State Signals 2.6.2. Clock Multiplexing 2.6.3. Adder Trees 2.6.4. State Machine HDL Guidelines 2.6.5. Multiplexer HDL Guidelines 2.6.6. Cyclic Redundancy Check Functions 2.6.7. Comparator HDL Guidelines 2.6.8. Counter HDL Guidelines
2.6.3. Adder Trees x
2.6.3.1. Architectures with 4-Input LUTs in Logic Elements 2.6.3.2. Architectures with 6-Input LUTs in Adaptive Logic Modules
2.6.4. State Machine HDL Guidelines x
2.6.4.1. Verilog HDL State Machines 2.6.4.2. VHDL State Machines
2.6.4.1. Verilog HDL State Machines x
2.6.4.1.1. Verilog-2001 State Machine Coding Example 2.6.4.1.2. SystemVerilog State Machine Coding Example
2.6.4.2. VHDL State Machines x
2.6.4.2.1. VHDL State Machine Coding Example
2.6.5. Multiplexer HDL Guidelines x
2.6.5.1. Intel® Quartus® Prime Software Option for Multiplexer Restructuring 2.6.5.2. Multiplexer Types 2.6.5.3. Implicit Defaults in IF Statements 2.6.5.4. default or OTHERS CASE Assignment
2.6.5.2. Multiplexer Types x
2.6.5.2.1. Binary Multiplexers 2.6.5.2.2. Selector Multiplexers 2.6.5.2.3. Priority Multiplexers
2.6.6. Cyclic Redundancy Check Functions x
2.6.6.1. If Performance is Important, Optimize for Speed 2.6.6.2. Use Separate CRC Blocks Instead of Cascaded Stages 2.6.6.3. Use Separate CRC Blocks Instead of Allowing Blocks to Merge 2.6.6.4. Take Advantage of Latency if Available 2.6.6.5. Save Power by Disabling CRC Blocks When Not in Use 2.6.6.6. Initialize the Device with the Synchronous Load (sload) Signal
3. Managing Metastability with the Intel® Quartus® Prime Software x
3.1. Metastability Analysis in the Intel® Quartus® Prime Software 3.2. Metastability and MTBF Reporting 3.3. MTBF Optimization 3.4. Reducing Metastability Effects 3.5. Scripting Support 3.6. Managing Metastability 3.7. Managing Metastability with the Intel® Quartus® Prime Software Revision History
3.1. Metastability Analysis in the Intel® Quartus® Prime Software x
3.1.1. Synchronization Register Chains 3.1.2. Identify Synchronizers for Metastability Analysis 3.1.3. How Timing Constraints Affect Synchronizer Identification and Metastability Analysis
3.2. Metastability and MTBF Reporting x
3.2.1. Metastability Reports 3.2.2. Synchronizer Data Toggle Rate in MTBF Calculation
3.2.1. Metastability Reports x
3.2.1.1. MTBF Summary Report 3.2.1.2. Synchronizer Summary Report 3.2.1.3. Synchronizer Chain Statistics Report in the Timing Analyzer
3.2.1.1. MTBF Summary Report x
3.2.1.1.1. Typical and Worst-Case MTBF of Design 3.2.1.1.2. Synchronizer Chains 3.2.1.1.3. Increasing Available Settling Time
3.3. MTBF Optimization x
3.3.1. Synchronization Register Chain Length
3.4. Reducing Metastability Effects x
3.4.1. Apply Complete System-Centric Timing Constraints for the Timing Analyzer 3.4.2. Force the Identification of Synchronization Registers 3.4.3. Set the Synchronizer Data Toggle Rate 3.4.4. Optimize Metastability During Fitting 3.4.5. Increase the Length of Synchronizers to Protect and Optimize 3.4.6. Set Fitter Effort to Standard Fit instead of Auto Fit 3.4.7. Increase the Number of Stages Used in Synchronizers 3.4.8. Select a Faster Speed Grade Device
3.5. Scripting Support x
3.5.1. Identifying Synchronizers for Metastability Analysis 3.5.2. Synchronizer Data Toggle Rate in MTBF Calculation 3.5.3. report_metastability and Tcl Command 3.5.4. MTBF Optimization 3.5.5. Synchronization Register Chain Length
1. Recommended Design Practices
2. Recommended HDL Coding Styles
3. Managing Metastability with the Intel® Quartus® Prime Software
A. Intel® Quartus® Prime Standard Edition User Guides

2.4.1.11. Specifying Initial Memory Contents at Power-Up

Your synthesis tool may offer various ways to specify the initial contents of an inferred memory. There are slight power-up and initialization differences between dedicated RAM blocks and the MLAB memory, due to the continuous read of the MLAB.

Intel FPGA dedicated RAM block outputs always power-up to zero, and are set to the initial value on the first read. For example, if address 0 is pre-initialized to FF, the RAM block powers up with the output at 0. A subsequent read after power-up from address 0 outputs the pre-initialized value of FF. Therefore, if a RAM powers up and an enable (read enable or clock enable) is held low, the power-up output of 0 maintains until the first valid read cycle. The synthesis tool implements MLAB using registers that power-up to 0, but initialize to their initial value immediately at power-up or reset. Therefore, the initial value is seen, regardless of the enable status. The Intel® Quartus® Prime software maps inferred memory to MLABs when the HDL code specifies an appropriate ramstyle attribute.

In Verilog HDL, you can use an initial block to initialize the contents of an inferred memory. Intel® Quartus® Prime Standard Edition integrated synthesis automatically converts the initial block into a Memory Initialization File (.mif) for the inferred RAM.

Verilog HDL RAM with Initialized Contents

module ram_with_init(
   output reg [7:0] q,
   input [7:0] d,
   input [4:0] write_address, read_address,
   input we, clk
);
   reg [7:0] mem [0:31];
   integer i;

   initial begin
      for (i = 0; i < 32; i = i + 1)
         mem[i] = i[7:0];
   end

   always @ (posedge clk) begin
      if (we)
         mem[write_address] <= d;
      q <= mem[read_address];
   end
endmodule

Intel® Quartus® Prime Standard Edition integrated synthesis and other synthesis tools also support the $readmemb and $readmemh attributes. These attributes allow RAM initialization and ROM initialization work identically in synthesis and simulation.

Verilog HDL RAM Initialized with the readmemb Command

reg [7:0] ram[0:15];
initial 
begin
	$readmemb("ram.txt", ram);
end

In VHDL, you can initialize the contents of an inferred memory by specifying a default value for the corresponding signal. Intel® Quartus® Prime Standard Edition integrated synthesis automatically converts the default value into a .mif file for the inferred RAM.

VHDL RAM with Initialized Contents

LIBRARY ieee;
USE ieee.std_logic_1164.all;
use ieee.numeric_std.all;

ENTITY ram_with_init IS
    PORT(
            clock: IN STD_LOGIC;
            data: IN UNSIGNED (7 DOWNTO 0);
            write_address: IN integer RANGE 0 to 31;
            read_address: IN integer RANGE 0 to 31;
            we: IN std_logic;
            q: OUT UNSIGNED (7 DOWNTO 0));
END;

ARCHITECTURE rtl OF ram_with_init IS

    TYPE MEM IS ARRAY(31 DOWNTO 0) OF unsigned(7 DOWNTO 0);
    FUNCTION initialize_ram
        return MEM is
        variable result : MEM;
    BEGIN 
        FOR i IN 31 DOWNTO 0 LOOP
            result(i) := to_unsigned(natural(i), natural'(8));
        END LOOP; 
        RETURN result;
    END initialize_ram;

    SIGNAL ram_block : MEM := initialize_ram;
BEGIN
    PROCESS (clock)
    BEGIN
        IF (rising_edge(clock)) THEN
            IF (we = '1') THEN
            ram_block(write_address) <= data;
            END IF;
            q <= ram_block(read_address);
        END IF;
    END PROCESS;
END rtl;
Level Two Title