Intel® Quartus® Prime Standard Edition User Guide: Design Recommendations

Download PDF
ID 683323
Date 9/24/2018
Public
Document Table of Contents
Document Table of Contents x
1. Recommended Design Practices 2. Recommended HDL Coding Styles 3. Managing Metastability with the Intel® Quartus® Prime Software A. Intel® Quartus® Prime Standard Edition User Guides
1. Recommended Design Practices x
1.1. Following Synchronous FPGA Design Practices 1.2. HDL Design Guidelines 1.3. Checking Design Violations 1.4. Use Clock and Register-Control Architectural Features 1.5. Implementing Embedded RAM 1.6. Recommended Design Practices Revision History
1.1. Following Synchronous FPGA Design Practices x
1.1.1. Implementing Synchronous Designs 1.1.2. Asynchronous Design Hazards
1.2. HDL Design Guidelines x
1.2.1. Optimizing Combinational Logic 1.2.2. Optimizing Clocking Schemes 1.2.3. Optimizing Physical Implementation and Timing Closure 1.2.4. Optimizing Power Consumption 1.2.5. Managing Design Metastability
1.2.1. Optimizing Combinational Logic x
1.2.1.1. Avoid Combinational Loops 1.2.1.2. Avoid Unintended Latch Inference 1.2.1.3. Avoid Delay Chains in Clock Paths 1.2.1.4. Use Synchronous Pulse Generators
1.2.2. Optimizing Clocking Schemes x
1.2.2.1. Register Combinational Logic Outputs 1.2.2.2. Avoid Asynchronous Clock Division 1.2.2.3. Avoid Ripple Counters 1.2.2.4. Use Multiplexed Clocks 1.2.2.5. Use Gated Clocks 1.2.2.6. Use Synchronous Clock Enables
1.2.2.5. Use Gated Clocks x
1.2.2.5.1. Recommended Clock-Gating Methods
1.2.3. Optimizing Physical Implementation and Timing Closure x
1.2.3.1. Planning Physical Implementation 1.2.3.2. Planning FPGA Resources 1.2.3.3. Optimizing for Timing Closure 1.2.3.4. Optimizing Critical Timing Paths
1.3. Checking Design Violations x
1.3.1. Validating Against Design Rules 1.3.2. Creating Custom Design Rules
1.3.2. Creating Custom Design Rules x
1.3.2.1. Custom Design Rule Examples
1.4. Use Clock and Register-Control Architectural Features x
1.4.1. Use Global Reset Resources 1.4.2. Use Global Clock Network Resources 1.4.3. Use Clock Region Assignments to Optimize Clock Constraints 1.4.4. Avoid Asynchronous Register Control Signals
1.4.1. Use Global Reset Resources x
1.4.1.1. Use Synchronous Resets 1.4.1.2. Using Asynchronous Resets 1.4.1.3. Use Synchronized Asynchronous Reset
1.4.3. Use Clock Region Assignments to Optimize Clock Constraints x
1.4.3.1. Clock Region Assignments in Intel® Arria® 10 and Older Device Families
2. Recommended HDL Coding Styles x
2.1. Using Provided HDL Templates 2.2. Instantiating IP Cores in HDL 2.3. Inferring Multipliers and DSP Functions 2.4. Inferring Memory Functions from HDL Code 2.5. Register and Latch Coding Guidelines 2.6. General Coding Guidelines 2.7. Designing with Low-Level Primitives 2.8. Recommended HDL Coding Styles Revision History
2.1. Using Provided HDL Templates x
2.1.1. Inserting HDL Code from a Provided Template
2.3. Inferring Multipliers and DSP Functions x
2.3.1. Inferring Multipliers 2.3.2. Inferring Multiply-Accumulator and Multiply-Adder Functions
2.4. Inferring Memory Functions from HDL Code x
2.4.1. Inferring RAM functions from HDL Code 2.4.2. Inferring ROM Functions from HDL Code 2.4.3. Inferring Shift Registers in HDL Code
2.4.1. Inferring RAM functions from HDL Code x
2.4.1.1. Use Synchronous Memory Blocks 2.4.1.2. Avoid Unsupported Reset and Control Conditions 2.4.1.3. Check Read-During-Write Behavior 2.4.1.4. Controlling RAM Inference and Implementation 2.4.1.5. Single-Clock Synchronous RAM with Old Data Read-During-Write Behavior 2.4.1.6. Single-Clock Synchronous RAM with New Data Read-During-Write Behavior 2.4.1.7. Simple Dual-Port, Dual-Clock Synchronous RAM 2.4.1.8. True Dual-Port Synchronous RAM 2.4.1.9. Mixed-Width Dual-Port RAM 2.4.1.10. RAM with Byte-Enable Signals 2.4.1.11. Specifying Initial Memory Contents at Power-Up
2.4.3. Inferring Shift Registers in HDL Code x
2.4.3.1. Simple Shift Register 2.4.3.2. Shift Register with Evenly Spaced Taps
2.5. Register and Latch Coding Guidelines x
2.5.1. Register Power-Up Values 2.5.2. Secondary Register Control Signals Such as Clear and Clock Enable 2.5.3. Latches
2.5.1. Register Power-Up Values x
2.5.1.1. Specifying a Power-Up Value
2.5.3. Latches x
2.5.3.1. Avoid Unintentional Latch Generation 2.5.3.2. Inferring Latches Correctly
2.6. General Coding Guidelines x
2.6.1. Tri-State Signals 2.6.2. Clock Multiplexing 2.6.3. Adder Trees 2.6.4. State Machine HDL Guidelines 2.6.5. Multiplexer HDL Guidelines 2.6.6. Cyclic Redundancy Check Functions 2.6.7. Comparator HDL Guidelines 2.6.8. Counter HDL Guidelines
2.6.3. Adder Trees x
2.6.3.1. Architectures with 4-Input LUTs in Logic Elements 2.6.3.2. Architectures with 6-Input LUTs in Adaptive Logic Modules
2.6.4. State Machine HDL Guidelines x
2.6.4.1. Verilog HDL State Machines 2.6.4.2. VHDL State Machines
2.6.4.1. Verilog HDL State Machines x
2.6.4.1.1. Verilog-2001 State Machine Coding Example 2.6.4.1.2. SystemVerilog State Machine Coding Example
2.6.4.2. VHDL State Machines x
2.6.4.2.1. VHDL State Machine Coding Example
2.6.5. Multiplexer HDL Guidelines x
2.6.5.1. Intel® Quartus® Prime Software Option for Multiplexer Restructuring 2.6.5.2. Multiplexer Types 2.6.5.3. Implicit Defaults in IF Statements 2.6.5.4. default or OTHERS CASE Assignment
2.6.5.2. Multiplexer Types x
2.6.5.2.1. Binary Multiplexers 2.6.5.2.2. Selector Multiplexers 2.6.5.2.3. Priority Multiplexers
2.6.6. Cyclic Redundancy Check Functions x
2.6.6.1. If Performance is Important, Optimize for Speed 2.6.6.2. Use Separate CRC Blocks Instead of Cascaded Stages 2.6.6.3. Use Separate CRC Blocks Instead of Allowing Blocks to Merge 2.6.6.4. Take Advantage of Latency if Available 2.6.6.5. Save Power by Disabling CRC Blocks When Not in Use 2.6.6.6. Initialize the Device with the Synchronous Load (sload) Signal
3. Managing Metastability with the Intel® Quartus® Prime Software x
3.1. Metastability Analysis in the Intel® Quartus® Prime Software 3.2. Metastability and MTBF Reporting 3.3. MTBF Optimization 3.4. Reducing Metastability Effects 3.5. Scripting Support 3.6. Managing Metastability 3.7. Managing Metastability with the Intel® Quartus® Prime Software Revision History
3.1. Metastability Analysis in the Intel® Quartus® Prime Software x
3.1.1. Synchronization Register Chains 3.1.2. Identify Synchronizers for Metastability Analysis 3.1.3. How Timing Constraints Affect Synchronizer Identification and Metastability Analysis
3.2. Metastability and MTBF Reporting x
3.2.1. Metastability Reports 3.2.2. Synchronizer Data Toggle Rate in MTBF Calculation
3.2.1. Metastability Reports x
3.2.1.1. MTBF Summary Report 3.2.1.2. Synchronizer Summary Report 3.2.1.3. Synchronizer Chain Statistics Report in the Timing Analyzer
3.2.1.1. MTBF Summary Report x
3.2.1.1.1. Typical and Worst-Case MTBF of Design 3.2.1.1.2. Synchronizer Chains 3.2.1.1.3. Increasing Available Settling Time
3.3. MTBF Optimization x
3.3.1. Synchronization Register Chain Length
3.4. Reducing Metastability Effects x
3.4.1. Apply Complete System-Centric Timing Constraints for the Timing Analyzer 3.4.2. Force the Identification of Synchronization Registers 3.4.3. Set the Synchronizer Data Toggle Rate 3.4.4. Optimize Metastability During Fitting 3.4.5. Increase the Length of Synchronizers to Protect and Optimize 3.4.6. Set Fitter Effort to Standard Fit instead of Auto Fit 3.4.7. Increase the Number of Stages Used in Synchronizers 3.4.8. Select a Faster Speed Grade Device
3.5. Scripting Support x
3.5.1. Identifying Synchronizers for Metastability Analysis 3.5.2. Synchronizer Data Toggle Rate in MTBF Calculation 3.5.3. report_metastability and Tcl Command 3.5.4. MTBF Optimization 3.5.5. Synchronization Register Chain Length
1. Recommended Design Practices
2. Recommended HDL Coding Styles
3. Managing Metastability with the Intel® Quartus® Prime Software
A. Intel® Quartus® Prime Standard Edition User Guides

1.6. Recommended Design Practices Revision History

The following revision history applies to this chapter:

Document Version Intel® Quartus® Prime Version Changes
2018.09.24 18.1.0
  • Initial release in Intel Quartus Prime Standard Edition User Guide.
  • Created subtopic: Clock Region Assignments in Intel Arria 10 and Older Device Families from content in topic: Use Clock Region Assignments to Optimize Clock Constraints.
2017.11.06 17.1.0
  • Updated topic: Optimizing Timing Closure.
2016.05.03 16.0.0
  • Replaced Internally Synchronized Reset code sample with corrected version.
  • Stated limitations about deprecated physical synthesis options.
  • Clarified limitations of support for Design Assistant.
2015.11.02 15.1.0
  • Changed instances of Quartus II to Quartus Prime.
2014.12.15 14.1.0 Updated location of Fitter Settings, Analysis & Synthesis Settings, and Physical Optimization Settings to Compiler Settings.
June 2014 14.0.0 Removed references to obsolete MegaWizard Plug-In Manager.
November 2013 13.1.0 Removed HardCopy device information.
May 2013 13.0.0

Removed PrimeTime support.

June 2012 12.0.0 Removed survey link.
November 2011 11.0.1 Template update.
May 2011 11.0.0 Added information to Reset Resources .
December 2010 10.1.0
  • Title changed from Design Recommendations for Altera Devices and the Quartus II Design Assistant.
  • Updated to new template.
  • Added references to Quartus II Help for “Metastability” on page 9–13 and “Incremental Compilation” on page 9–13.
  • Removed duplicated content and added references to Help for “Custom Rules” on page 9–15.
July 2010 10.0.0
  • Removed duplicated content and added references to Quartus II Help for Design Assistant settings, Design Assistant rules, Enabling and Disabling Design Assistant Rules, and Viewing Design Assistant reports.
  • Removed information from “Combinational Logic Structures” on page 5–4
  • Changed heading from “Design Techniques to Save Power” to “Power Optimization” on page 5–12
  • Added new “Metastability” section
  • Added new “Incremental Compilation” section
  • Added information to “Reset Resources” on page 5–23
  • Removed “Referenced Documents” section
November 2009 9.1.0
  • Removed documentation of obsolete rules.
March 2009 9.0.0
  • No change to content.
November 2008 8.1.0
  • Changed to 8-1/2 x 11 page size
  • Added new section “Custom Rules Coding Examples” on page 5–18
  • Added paragraph to “Recommended Clock-Gating Methods” on page 5–11
  • Added new section: “Design Techniques to Save Power” on page 5–12
May 2008 8.0.0
  • Updated Figure 5–9 on page 5–13; added custom rules file to the flow
  • Added notes to Figure 5–9 on page 5–13
  • Added new section: “Custom Rules Report” on page 5–34
  • Added new section: “Custom Rules” on page 5–34
  • Added new section: “Targeting Embedded RAM Architectural Features” on page 5–38
  • Minor editorial updates throughout the chapter
  • Added hyperlinks to referenced documents throughout the chapter
Related Information
Level Two Title