Visible to Intel only — GUID: mwh1409959491235
Ixiasoft
2.1. Using Provided HDL Templates
2.2. Instantiating IP Cores in HDL
2.3. Inferring Multipliers and DSP Functions
2.4. Inferring Memory Functions from HDL Code
2.5. Register and Latch Coding Guidelines
2.6. General Coding Guidelines
2.7. Designing with Low-Level Primitives
2.8. Recommended HDL Coding Styles Revision History
2.4.1.1. Use Synchronous Memory Blocks
2.4.1.2. Avoid Unsupported Reset and Control Conditions
2.4.1.3. Check Read-During-Write Behavior
2.4.1.4. Controlling RAM Inference and Implementation
2.4.1.5. Single-Clock Synchronous RAM with Old Data Read-During-Write Behavior
2.4.1.6. Single-Clock Synchronous RAM with New Data Read-During-Write Behavior
2.4.1.7. Simple Dual-Port, Dual-Clock Synchronous RAM
2.4.1.8. True Dual-Port Synchronous RAM
2.4.1.9. Mixed-Width Dual-Port RAM
2.4.1.10. RAM with Byte-Enable Signals
2.4.1.11. Specifying Initial Memory Contents at Power-Up
2.6.6.1. If Performance is Important, Optimize for Speed
2.6.6.2. Use Separate CRC Blocks Instead of Cascaded Stages
2.6.6.3. Use Separate CRC Blocks Instead of Allowing Blocks to Merge
2.6.6.4. Take Advantage of Latency if Available
2.6.6.5. Save Power by Disabling CRC Blocks When Not in Use
2.6.6.6. Initialize the Device with the Synchronous Load (sload) Signal
3.4.1. Apply Complete System-Centric Timing Constraints for the Timing Analyzer
3.4.2. Force the Identification of Synchronization Registers
3.4.3. Set the Synchronizer Data Toggle Rate
3.4.4. Optimize Metastability During Fitting
3.4.5. Increase the Length of Synchronizers to Protect and Optimize
3.4.6. Set Fitter Effort to Standard Fit instead of Auto Fit
3.4.7. Increase the Number of Stages Used in Synchronizers
3.4.8. Select a Faster Speed Grade Device
Visible to Intel only — GUID: mwh1409959491235
Ixiasoft
1.2.1. Optimizing Combinational Logic
Combinational logic structures consist of logic functions that depend only on the current state of the inputs. In Intel FPGAs, these functions are implemented in the look-up tables (LUTs) with either logic elements (LEs) or adaptive logic modules (ALMs).
For cases where combinational logic feeds registers, the register control signals can implement part of the logic function to save LUT resources. By following the recommendations in this section, you can improve the reliability of your combinational design.