Intel® Quartus® Prime Standard Edition User Guide: Design Recommendations

Download PDF
ID 683323
Date 9/24/2018
Public
Document Table of Contents
Document Table of Contents x
1. Recommended Design Practices 2. Recommended HDL Coding Styles 3. Managing Metastability with the Intel® Quartus® Prime Software A. Intel® Quartus® Prime Standard Edition User Guides
1. Recommended Design Practices x
1.1. Following Synchronous FPGA Design Practices 1.2. HDL Design Guidelines 1.3. Checking Design Violations 1.4. Use Clock and Register-Control Architectural Features 1.5. Implementing Embedded RAM 1.6. Recommended Design Practices Revision History
1.1. Following Synchronous FPGA Design Practices x
1.1.1. Implementing Synchronous Designs 1.1.2. Asynchronous Design Hazards
1.2. HDL Design Guidelines x
1.2.1. Optimizing Combinational Logic 1.2.2. Optimizing Clocking Schemes 1.2.3. Optimizing Physical Implementation and Timing Closure 1.2.4. Optimizing Power Consumption 1.2.5. Managing Design Metastability
1.2.1. Optimizing Combinational Logic x
1.2.1.1. Avoid Combinational Loops 1.2.1.2. Avoid Unintended Latch Inference 1.2.1.3. Avoid Delay Chains in Clock Paths 1.2.1.4. Use Synchronous Pulse Generators
1.2.2. Optimizing Clocking Schemes x
1.2.2.1. Register Combinational Logic Outputs 1.2.2.2. Avoid Asynchronous Clock Division 1.2.2.3. Avoid Ripple Counters 1.2.2.4. Use Multiplexed Clocks 1.2.2.5. Use Gated Clocks 1.2.2.6. Use Synchronous Clock Enables
1.2.2.5. Use Gated Clocks x
1.2.2.5.1. Recommended Clock-Gating Methods
1.2.3. Optimizing Physical Implementation and Timing Closure x
1.2.3.1. Planning Physical Implementation 1.2.3.2. Planning FPGA Resources 1.2.3.3. Optimizing for Timing Closure 1.2.3.4. Optimizing Critical Timing Paths
1.3. Checking Design Violations x
1.3.1. Validating Against Design Rules 1.3.2. Creating Custom Design Rules
1.3.2. Creating Custom Design Rules x
1.3.2.1. Custom Design Rule Examples
1.4. Use Clock and Register-Control Architectural Features x
1.4.1. Use Global Reset Resources 1.4.2. Use Global Clock Network Resources 1.4.3. Use Clock Region Assignments to Optimize Clock Constraints 1.4.4. Avoid Asynchronous Register Control Signals
1.4.1. Use Global Reset Resources x
1.4.1.1. Use Synchronous Resets 1.4.1.2. Using Asynchronous Resets 1.4.1.3. Use Synchronized Asynchronous Reset
1.4.3. Use Clock Region Assignments to Optimize Clock Constraints x
1.4.3.1. Clock Region Assignments in Intel® Arria® 10 and Older Device Families
2. Recommended HDL Coding Styles x
2.1. Using Provided HDL Templates 2.2. Instantiating IP Cores in HDL 2.3. Inferring Multipliers and DSP Functions 2.4. Inferring Memory Functions from HDL Code 2.5. Register and Latch Coding Guidelines 2.6. General Coding Guidelines 2.7. Designing with Low-Level Primitives 2.8. Recommended HDL Coding Styles Revision History
2.1. Using Provided HDL Templates x
2.1.1. Inserting HDL Code from a Provided Template
2.3. Inferring Multipliers and DSP Functions x
2.3.1. Inferring Multipliers 2.3.2. Inferring Multiply-Accumulator and Multiply-Adder Functions
2.4. Inferring Memory Functions from HDL Code x
2.4.1. Inferring RAM functions from HDL Code 2.4.2. Inferring ROM Functions from HDL Code 2.4.3. Inferring Shift Registers in HDL Code
2.4.1. Inferring RAM functions from HDL Code x
2.4.1.1. Use Synchronous Memory Blocks 2.4.1.2. Avoid Unsupported Reset and Control Conditions 2.4.1.3. Check Read-During-Write Behavior Continuous read in HDL code 2.4.1.4. Controlling RAM Inference and Implementation 2.4.1.5. Single-Clock Synchronous RAM with Old Data Read-During-Write Behavior 2.4.1.6. Single-Clock Synchronous RAM with New Data Read-During-Write Behavior 2.4.1.7. Simple Dual-Port, Dual-Clock Synchronous RAM 2.4.1.8. True Dual-Port Synchronous RAM 2.4.1.9. Mixed-Width Dual-Port RAM 2.4.1.10. RAM with Byte-Enable Signals 2.4.1.11. Specifying Initial Memory Contents at Power-Up
2.4.3. Inferring Shift Registers in HDL Code x
2.4.3.1. Simple Shift Register 2.4.3.2. Shift Register with Evenly Spaced Taps
2.5. Register and Latch Coding Guidelines x
2.5.1. Register Power-Up Values 2.5.2. Secondary Register Control Signals Such as Clear and Clock Enable 2.5.3. Latches
2.5.1. Register Power-Up Values x
2.5.1.1. Specifying a Power-Up Value
2.5.3. Latches x
2.5.3.1. Avoid Unintentional Latch Generation 2.5.3.2. Inferring Latches Correctly
2.6. General Coding Guidelines x
2.6.1. Tri-State Signals 2.6.2. Clock Multiplexing 2.6.3. Adder Trees 2.6.4. State Machine HDL Guidelines 2.6.5. Multiplexer HDL Guidelines 2.6.6. Cyclic Redundancy Check Functions 2.6.7. Comparator HDL Guidelines 2.6.8. Counter HDL Guidelines
2.6.3. Adder Trees x
2.6.3.1. Architectures with 4-Input LUTs in Logic Elements 2.6.3.2. Architectures with 6-Input LUTs in Adaptive Logic Modules
2.6.4. State Machine HDL Guidelines x
2.6.4.1. Verilog HDL State Machines 2.6.4.2. VHDL State Machines
2.6.4.1. Verilog HDL State Machines x
2.6.4.1.1. Verilog-2001 State Machine Coding Example 2.6.4.1.2. SystemVerilog State Machine Coding Example
2.6.4.2. VHDL State Machines x
2.6.4.2.1. VHDL State Machine Coding Example
2.6.5. Multiplexer HDL Guidelines x
2.6.5.1. Intel® Quartus® Prime Software Option for Multiplexer Restructuring 2.6.5.2. Multiplexer Types 2.6.5.3. Implicit Defaults in IF Statements 2.6.5.4. default or OTHERS CASE Assignment
2.6.5.2. Multiplexer Types x
2.6.5.2.1. Binary Multiplexers 2.6.5.2.2. Selector Multiplexers 2.6.5.2.3. Priority Multiplexers
2.6.6. Cyclic Redundancy Check Functions x
2.6.6.1. If Performance is Important, Optimize for Speed 2.6.6.2. Use Separate CRC Blocks Instead of Cascaded Stages 2.6.6.3. Use Separate CRC Blocks Instead of Allowing Blocks to Merge 2.6.6.4. Take Advantage of Latency if Available 2.6.6.5. Save Power by Disabling CRC Blocks When Not in Use 2.6.6.6. Initialize the Device with the Synchronous Load (sload) Signal
3. Managing Metastability with the Intel® Quartus® Prime Software x
3.1. Metastability Analysis in the Intel® Quartus® Prime Software 3.2. Metastability and MTBF Reporting 3.3. MTBF Optimization 3.4. Reducing Metastability Effects 3.5. Scripting Support 3.6. Managing Metastability 3.7. Managing Metastability with the Intel® Quartus® Prime Software Revision History
3.1. Metastability Analysis in the Intel® Quartus® Prime Software x
3.1.1. Synchronization Register Chains 3.1.2. Identify Synchronizers for Metastability Analysis 3.1.3. How Timing Constraints Affect Synchronizer Identification and Metastability Analysis
3.2. Metastability and MTBF Reporting x
3.2.1. Metastability Reports 3.2.2. Synchronizer Data Toggle Rate in MTBF Calculation
3.2.1. Metastability Reports x
3.2.1.1. MTBF Summary Report 3.2.1.2. Synchronizer Summary Report 3.2.1.3. Synchronizer Chain Statistics Report in the Timing Analyzer
3.2.1.1. MTBF Summary Report x
3.2.1.1.1. Typical and Worst-Case MTBF of Design 3.2.1.1.2. Synchronizer Chains 3.2.1.1.3. Increasing Available Settling Time
3.3. MTBF Optimization x
3.3.1. Synchronization Register Chain Length
3.4. Reducing Metastability Effects x
3.4.1. Apply Complete System-Centric Timing Constraints for the Timing Analyzer 3.4.2. Force the Identification of Synchronization Registers 3.4.3. Set the Synchronizer Data Toggle Rate 3.4.4. Optimize Metastability During Fitting 3.4.5. Increase the Length of Synchronizers to Protect and Optimize 3.4.6. Set Fitter Effort to Standard Fit instead of Auto Fit 3.4.7. Increase the Number of Stages Used in Synchronizers 3.4.8. Select a Faster Speed Grade Device
3.5. Scripting Support x
3.5.1. Identifying Synchronizers for Metastability Analysis 3.5.2. Synchronizer Data Toggle Rate in MTBF Calculation 3.5.3. report_metastability and Tcl Command 3.5.4. MTBF Optimization 3.5.5. Synchronization Register Chain Length
1. Recommended Design Practices
2. Recommended HDL Coding Styles
3. Managing Metastability with the Intel® Quartus® Prime Software
A. Intel® Quartus® Prime Standard Edition User Guides

2.4.1.3. Check Read-During-Write Behavior

Ensure the read-during-write behavior of the memory block described in your HDL design is consistent with your target device architecture.

Your HDL source code specifies the memory behavior when you read and write from the same memory address in the same clock cycle. The read returns either the old data at the address, or the new data written to the address. This is referred to as the read-during-write behavior of the memory block. Intel FPGA memory blocks have different read-during-write behavior depending on the target device family, memory mode, and block type.

Synthesis tools preserve the functionality described in your source code. Therefore, if your source code specifies unsupported read-during-write behavior for the RAM blocks, the Intel® Quartus® Prime software implements the logic in regular logic cells as opposed to the dedicated RAM hardware.

Continuous read in HDL code

One common problem occurs when there is a continuous read in the HDL code, as in the following examples. Avoid using these coding styles: 

//Verilog HDL concurrent signal assignment
assign q = ram[raddr_reg];
-- VHDL concurrent signal assignment
q <= ram(raddr_reg);

This type of HDL implies that when a write operation takes place, the read immediately reflects the new data at the address independent of the read clock, which is the behavior of asynchronous memory blocks. Synthesis cannot directly map this behavior to a synchronous memory block. If the write clock and read clock are the same, synthesis can infer memory blocks and add extra bypass logic so that the device behavior matches the HDL behavior. If the write and read clocks are different, synthesis cannot reliably add bypass logic, so it implements the logic in regular logic cells instead of dedicated RAM blocks. The examples in the following sections discuss some of these differences for read-during-write conditions.

In addition, the MLAB memories in certain device logic array blocks (LABs) does not easily support old data or new data behavior for a read-during-write in the dedicated device architecture. Implementing the extra logic to support this behavior significantly reduces timing performance through the memory.

Note: For best performance in MLAB memories, ensure that your design does not depend on the read data during a write operation.

In many synthesis tools, you can declare that the read-during-write behavior is not important to your design (for example, if you never read from the same address to which you write in the same clock cycle). In Intel® Quartus® Prime Standard Edition integrated synthesis , set the synthesis attribute ramstyle to no_rw_check to allow Intel® Quartus® Prime software to define the read-during-write behavior of a RAM, rather than use the behavior specified by your HDL code. This attribute can prevent the synthesis tool from using extra logic to implement the memory block, or can allow memory inference when it would otherwise be impossible.

Synchronous RAM blocks require a synchronous read, so Intel® Quartus® Prime Standard Edition integrated synthesis packs either data output registers or read address registers into the RAM block. When the read address registers are packed into the RAM block, the read address signals connected to the RAM block contain the next value of the read address signals indexing the HDL variable, which impacts which clock cycle the read and the write occur, and changes the read-during-write conditions. Therefore, bypass logic may still be added to the design to preserve the read-during-write behavior, even if the no_rw_check attribute is set.

Level Two Title