DisplayPort Intel® FPGA IP User Guide

ID 683273
Date 4/18/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.3.1.2. Clock Recovery Interface

The following table lists the signals for the clock recovery core.

Table 13.  Clock Recovery Interface Signals

Interface

Port Type

Clock Domain

Port

Direction

Description

control clock

Clock

N/A

clk

Input

Control logic clock. This clock runs the loop controller and fPLL reconfiguration related blocks. Intel® recommends you use a 60 MHz clock.

RX link clock

Clock

N/A

rx_link_clk

Input

DisplayPort transceiver link clock. This clock is a divided version of the RX main link clock or divided by 4.

  • Divided by 2 when the sink core is instantiated in 20-bit mode (2 symbols per clock)
  • Divided by 4 when the sink core is instantiated in 40-bit mode (4 symbols per clock)

reset

Reset

clk

areset

Input

Asynchronous reset. This is an active-high signal.

RX link rate

Conduit

asynchronous rx_link_rate[1:0]

Input

DisplayPort RX link rate.

  • 00 = RBR (1.67 Gbps)
  • 01 = HBR (2.70 Gbps)
  • 10 = HBR2 (5.40 Gbps)

You need this information for the clock recovery clock to correctly calculate the fPLL parameters.

RX MSA

Conduit

rx_link_clk rx_msa[216:0]

Input

A set of different signals containing the following information:

  • MSA attributes and status
  • VB-ID attributes and status
  • Received video blanking timing

You must connect this set of signals as is from the DisplayPort Intel® FPGA IP to the clock recovery core.

Video Input

Conduit

vidin_clk vidin_clk

Input

Pixel clock.

vidin_data (BPP*PIXELS_PER_CLOCK–1:0)

Input

Pixel data.

vidin_valid

Input

You must assert this signal when all signals on this port are valid.

vidin_sol

Input

Start of video line.

vidin_eol

Input

End of video line.

vidin_sof

Input

Start of video frame.

vidin_eof

Input

End of video frame.

vidin_locked

Input

You must assert this signal when the DisplayPort RX is locked to a valid received video stream.

  • 1 = Video locked
  • 0 = Video unlocked

Video Output

Conduit

rec_clk

rec_clk

Output

Reconstructed video clock.

rec_clk_x2

Output

Reconstructed video clock double frequency.

vidout (BPP*PIXELS_PER_CLOCK–1:0)

Output

Pixel data.

hsync

Output

Horizontal sync. This signal can be active-high or active-low depending on the sync polarity from MSA.

vsync

Output

Vertical sync. This signal can be active-high or active-low depending on the sync polarity from MSA.

de

Output

Data enable. This signal is always active high.

field2

Output

The clock recovery core asserts this signal during the second video field for interlaced timings.

reset_out

Output

The clock recovery core asserts this signal when the other video output signals are not valid. This signal is asynchronous.