Visible to Intel only — GUID: hco1410462424872
Ixiasoft
Visible to Intel only — GUID: hco1410462424872
Ixiasoft
6.6.7. RX Transceiver Interface
The transceiver or Native PHY IP core instance is no longer instantiated within the DisplayPort Intel® FPGA IP. The DisplayPort Intel® FPGA IP uses a soft 8B/10B decoder for DP1.4. This interface receives RX transceiver recovered data (rx_parallel_data) in either dual symbol (20-bit) or quad symbol (40-bit) mode in DP1.4. The DisplayPort Intel® FPGA IP drives the digital reset (rx_digitalreset), analog reset (rx_analogreset), and controls the CDR circuitry locking mode.
When 128B/132B channel coding is used, the 32-bit symbols (per lane) is muxed to the 40-bit wide interface (rx_parallel_data) from the transceiver. The transceiver then needs to be dynamically reconfigured between 32-bit PMA width (128B/132B channel coding) and 40-bit PMA width (8B/10B channel coding). The Enable Simplified Data Interface must be disabled to expose a static width (rx_parallel_data) port.