SerialLite II IP Core User Guide

Download PDF
ID 683179
Date 7/13/2021
Public
Document Table of Contents
Document Table of Contents x
1. SerialLite II IP Core Overview 2. SerialLite II IP Core Getting Started 3. SerialLite II IP Core Functional Description 4. SerialLite II IP Core Testbench 5. SerialLite II IP Core User Guide Archives 6. Document Revision History for the SerialLite II IP Core User Guide
1. SerialLite II IP Core Overview x
1.1. General Description 1.2. Performance and Resource Utilization
2. SerialLite II IP Core Getting Started x
2.1. Parameterize the IP Core 2.2. Set Up Simulation 2.3. Generate Files 2.4. Simulate the Design 2.5. Instantiate the IP Core 2.6. Compile and Program Specify Constraints 2.8. SerialLite II Parameter Settings
2.8. SerialLite II Parameter Settings x
2.8.1. Link Consistency 2.8.2. Data Rate 2.8.3. Reference Clock Frequency 2.8.4. Port Type 2.8.5. Self Synchronized Link Up 2.8.6. Scramble 2.8.7. Broadcast Mode 2.8.8. Lane Polarity and Order Reversal 2.8.9. Data Type 2.8.10. Packet Type 2.8.11. Flow Control Operation 2.8.12. Transmit/Receive FIFO Buffers 2.8.13. Data Integrity Protection: CRC 2.8.14. Transceiver Configuration 2.8.15. Error Handling 2.8.16. Optimizing the Implementation
2.8.10. Packet Type x
2.8.10.1. Retry-on-Error
2.8.11. Flow Control Operation x
2.8.11.1. Selecting the Proper Threshold Value 2.8.11.2. Selecting the Proper Pause Duration 2.8.11.3. Selecting the Proper Refresh Value 2.8.11.4. External Flow Control (When RX FIFO Size is 0)
2.8.14. Transceiver Configuration x
2.8.14.1. Voltage Output Differential (VOD) Control Settings 2.8.14.2. Pre-Emphasis Control Settings 2.8.14.3. Transmitter Buffer Power (VCCH) 2.8.14.4. Transceiver Reconfiguration Block 2.8.14.5. ALTGX Support Signals
2.8.16. Optimizing the Implementation x
2.8.16.1. Improving Performance 2.8.16.2. Minimizing Logic Utilization 2.8.16.3. Minimizing Memory Utilization
3. SerialLite II IP Core Functional Description x
3.1. Atlantic Interface 3.2. High-Speed Serial Interface 3.3. Clocks and Data Rates 3.4. Multiple Core Configuration 3.5. IP Core Configuration for Intel® Arria® 10, Arria® V, Cyclone® V, and Stratix® V Devices 3.6. SerialLite II Signals 3.7. IP Core Verification
3.3. Clocks and Data Rates x
3.3.1. Aggregate Bandwidth 3.3.2. External Clock Modes 3.3.3. Internal Clocking Configurations 3.3.4. SerialLite II Deskew Support 3.3.5. SerialLite II Clocking Structure 3.3.6. SerialLite II Pin-Out Diagrams 3.3.7. Initialization and Restart
3.5. IP Core Configuration for Intel® Arria® 10, Arria® V, Cyclone® V, and Stratix® V Devices x
3.5.1. Design Consideration 3.5.2. Parameter Settings For SerialLite II and Custom PHY IP Cores 3.5.3. Extra Signals Between SerialLite II and Custom PHY IP Cores
4. SerialLite II IP Core Testbench x
4.1. Testbench Files 4.2. Testbench Specifications 4.3. Simulation Flow 4.4. Testbench Components
4.3. Simulation Flow x
4.3.1. Running a Simulation 4.3.2. Simulation Pass and Fail Conditions
4.3.2. Simulation Pass and Fail Conditions x
4.3.2.1. Value Change Dump (VCD) File Generation (For the Verilog HDL Testbench) 4.3.2.2. Testbench Time-Out 4.3.2.3. Special Simulation Configuration Settings 4.3.2.4. Atlantic Receiver Behavior
4.4. Testbench Components x
AGEN AMON 4.4.3. Status Monitors 4.4.4. Clock and Reset Generator 4.4.5. Custom PHY IP Core 4.4.6. Example Testbench – Verilog HDL
1. SerialLite II IP Core Overview
2. SerialLite II IP Core Getting Started
3. SerialLite II IP Core Functional Description
4. SerialLite II IP Core Testbench
5. SerialLite II IP Core User Guide Archives
6. Document Revision History for the SerialLite II IP Core User Guide

3.3.5. SerialLite II Clocking Structure

The SerialLite II IP core clock structures vary based on the configuration parameters.

The following diagrams show the SerialLite II IP core clock structures, which vary based on the configuration parameters.

Figure 20. Full-Featured Clock Structure


Figure 21. No Receiver FIFO Buffers Clock Structure


Figure 22. Full-Featured No Frequency Offset Clock Structure


Figure 23. No Receiver FIFO Buffers No Frequency Offset Clock Structure


Figure 24. Streaming Full-Featured Clock Structure


Figure 25. Streaming No Frequency Offset Clock Structure


Figure 26. Full Featured Clock Structure for 5G Symmetrical With TSIZE = 2


For Intel® Arria® 10, Arria® V, Cyclone® V, and Stratix® V configurations, you must integrate the transceiver to the SerialLite II IP core manually. When you configure the transceiver to work in more than 1 lane per SerialLite II instance, the tx_clkout(0) signal from the TX channel (PHY IP) must drive the SerialLite II input clock (tx_coreclk) and the input port (tx_coreclkin) of all TX channels (PHY IP). Similarly, if your design requires more than 1 RX channel per SerialLite II instance, the rx_clkout(0) from the RX channel (PHY IP) must drive the SerialLite II input clock (rx_coreclk) and the input port (rx_coreclkin) of all RX channels (PHY IP).

Level Two Title