F-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide

ID 683140
Date 2/03/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.1.1.1.1. Functional Level Reset (FLR)

Use the FLR interface to reset individual SR-IOV functions. The PCIe Hard IP supports FLR for both PFs and VFs. If the FLR is for a specific VF, the received packets for that VF are no longer valid.

The flr_* interface signals are provided to the application interface for this purpose. When the flr_rcvd* signal is asserted, it indicates that a FLR is received for a particular PF/VF. Application logic needs to perform its FLR routine and send the completion status back on the flr_completed* interface.

The Hard IP waits for the flr_completed* status to re-enable the VF. Prior to that event, the Hard IP will respond to transactions to the function that is reset by the FLR as follows:
  • It will discard all posted requests and return Unsupported Request (UR) for non-posted requests.
  • It will discard completions as Unexpected Completions (UC).
The following figure shows the timing diagram for an FLR event targeting a PF (PF1 in this example).
Figure 48. FLR for PF
The following figure shows the timing diagram for an FLR event targeting a VF.
Figure 49. FLR for VF