Visible to Intel only — GUID: vgo1455700099889
Ixiasoft
1. SDI II Intel® FPGA IP Quick Reference
2. SDI II IP Core Overview
3. SDI II IP Core Getting Started
4. SDI II IP Core Parameters
5. SDI II IP Core Functional Description
6. SDI II IP Core Signals
7. SDI II IP Core Design Considerations
8. SDI II IP Core Testbench and Design Examples
9. SDI II Intel® FPGA IP User Guide Archives
10. Document Revision History for the SDI II Intel® FPGA IP User Guide
5.3.1. Insert Line
5.3.2. Insert/Check CRC
5.3.3. Insert Payload ID
5.3.4. Match TRS
5.3.5. Scrambler
5.3.6. TX Sample
5.3.7. Clock Enable Generator
5.3.8. RX Sample
5.3.9. Detect Video Standard
5.3.10. Detect 1 and 1/1.001 Rates
5.3.11. Transceiver Controller
5.3.12. Descrambler
5.3.13. TRS Aligner
5.3.14. 3Gb Demux
5.3.15. Extract Line
5.3.16. Extract Payload ID
5.3.17. Detect Format
5.3.18. Sync Streams
5.3.19. Convert SD Bits
5.3.20. Insert Sync Bits
5.3.21. Remove Sync Bits
5.4.1. HD-SDI Dual Link to 3G-SDI (Level B) Conversion
5.4.2. 3G-SDI (Level B) to HD-SDI Dual Link Conversion
5.4.3. SMPTE RP168 Switching Support
5.4.4. SD 20-Bit Interface for Dual/Triple Rate
5.4.5. Dynamic TX Clock Switching for Arria V, Cyclone V, and Stratix V Devices
5.4.6. Intel FPGA Video Streaming Interface
7.1.2.1. Changing RX CDR Reference Clock in Transceiver Native PHY IP Core
7.1.2.2. Merging Simplex Mode Transceiver in the Same Channel
7.1.2.3. Using Generated Reconfiguration Management for Triple and Multi Rates
7.1.2.4. Ensuring Independent RX and TX Operations in the Same Channel
7.1.2.5. Potential Routing Problem During Fitter Stage in Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices
7.1.2.6. Unconstrained Clocks in SDI Multi-Rate RX Using Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices
7.1.2.7. Unused Transceiver Channels
7.1.2.8. Routing Transceiver Reference Clock Pins to Core Logic in Intel® Stratix® 10 Devices
Visible to Intel only — GUID: vgo1455700099889
Ixiasoft
7.1.2.2. Merging Simplex Mode Transceiver in the Same Channel
To merge simplex mode transceiver in the same channel, add the following commands in the Quartus Settings File (.qsf) in your project directory:
- set_instance_assignment -name XCVR_RECONFIG_GROUP 1 -to <tx_serial_pin>
- set_instance_assignment -name XCVR_RECONFIG_GROUP 1 -to <rx_serial_pin>
For more details about merging transceivers, refer to the Dynamic Reconfiguration Interface Merging Across Multiple IP Blocks section in the respective FPGA Transceiver PHY user guides.