SDI II Intel® FPGA IP User Guide

ID 683133
Date 12/09/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

7.1.2.8. Routing Transceiver Reference Clock Pins to Core Logic in Intel® Stratix® 10 Devices

Due to the number of clock paths available from the transceiver tile to the core logic, you must assign a clock from the GPIO pin to feed the rx_coreclk and other processing blocks which run on core logic. You must make the clock assignment if the following conditions apply:
  • Uses channel 0 and channel 3 in a transceiver bank.
  • SDI RX and TX cores are placed in either one of these channels.
  • Both SDI RX and RX cores are in multi-rate mode.