Quartus® Prime Pro Edition User Guide: Design Recommendations

Download PDF
ID 683082
Date 12/11/2024
Public
Document Table of Contents
Document Table of Contents x
Answers to Top FAQs 1. Recommended HDL Coding Styles 2. Recommended Design Practices 3. Managing Metastability with the Quartus® Prime Software 4. Quartus® Prime Pro Edition User Guide: Design Recommendations Archive A. Quartus® Prime Pro Edition User Guides
1. Recommended HDL Coding Styles x
1.1. Using Provided HDL Templates 1.2. Instantiating IP Cores in HDL 1.3. Inferring Multipliers and DSP Functions 1.4. Inferring Memory Functions from HDL Code 1.5. Register and Latch Coding Guidelines 1.6. General Coding Guidelines 1.7. Designing with Low-Level Primitives 1.8. Cross-Module Referencing (XMR) in HDL Code 1.9. Using force Statements in HDL Code 1.10. Recommended HDL Coding Styles Revision History
1.1. Using Provided HDL Templates x
1.1.1. Inserting HDL Code from a Provided Template
1.3. Inferring Multipliers and DSP Functions x
1.3.1. Inferring Multipliers 1.3.2. Inferring Multiply-Accumulator and Multiply-Adder Functions
1.4. Inferring Memory Functions from HDL Code x
1.4.1. Inferring RAM functions from HDL Code 1.4.2. Inferring ROM Functions from HDL Code 1.4.3. Inferring Shift Registers in HDL Code 1.4.4. Inferring FIFOs in HDL Code
1.4.1. Inferring RAM functions from HDL Code x
1.4.1.1. Use Synchronous Memory Blocks 1.4.1.2. Avoid Unsupported Reset and Control Conditions 1.4.1.3. Check Read-During-Write Behavior 1.4.1.4. Controlling RAM Inference and Implementation 1.4.1.5. Single-Clock Synchronous RAM with Old Data Read-During-Write Behavior 1.4.1.6. Single-Clock Synchronous RAM with New Data Read-During-Write Behavior 1.4.1.7. Simple Dual-Port, Dual-Clock Synchronous RAM 1.4.1.8. True Dual-Port Synchronous RAM 1.4.1.9. Mixed-Width Dual-Port RAM 1.4.1.10. RAM with Byte-Enable Signals 1.4.1.11. Specifying Initial Memory Contents at Power-Up
1.4.3. Inferring Shift Registers in HDL Code x
1.4.3.1. Simple Shift Register 1.4.3.2. Shift Register with Evenly Spaced Taps
1.4.4. Inferring FIFOs in HDL Code x
1.4.4.1. Dual Clock FIFO Example in Verilog HDL 1.4.4.2. Dual Clock FIFO Timing Constraints
1.5. Register and Latch Coding Guidelines x
1.5.1. Register Power-Up Values 1.5.2. Secondary Register Control Signals Such as Clear and Clock Enable 1.5.3. Latches
1.5.1. Register Power-Up Values x
1.5.1.1. Specifying a Power-Up Value
1.5.3. Latches x
1.5.3.1. Avoid Unintentional Latch Generation 1.5.3.2. Inferring Latches Correctly
1.6. General Coding Guidelines x
1.6.1. Tri-State Signals 1.6.2. Clock Multiplexing 1.6.3. Adder Trees 1.6.4. State Machine HDL Guidelines 1.6.5. Multiplexer HDL Guidelines 1.6.6. Cyclic Redundancy Check Functions 1.6.7. Comparator HDL Guidelines 1.6.8. Counter HDL Guidelines
1.6.3. Adder Trees x
1.6.3.1. Architectures with 6-Input LUTs in Adaptive Logic Modules 1.6.3.2. Change Adder Tree Styles
1.6.4. State Machine HDL Guidelines x
1.6.4.1. State Machine Processing 1.6.4.2. State Machine Power-Up 1.6.4.3. Verilog HDL State Machines 1.6.4.4. VHDL State Machines
1.6.4.3. Verilog HDL State Machines x
1.6.4.3.1. Verilog-2001 State Machine Coding Example 1.6.4.3.2. SystemVerilog State Machine Coding Example
1.6.4.4. VHDL State Machines x
1.6.4.4.1. VHDL State Machine Coding Example
1.6.5. Multiplexer HDL Guidelines x
1.6.5.1. Quartus® Prime Software Option for Multiplexer Restructuring 1.6.5.2. Multiplexer Types 1.6.5.3. Implicit Defaults in IF Statements 1.6.5.4. default or OTHERS CASE Assignment
1.6.5.2. Multiplexer Types x
1.6.5.2.1. Binary Multiplexers 1.6.5.2.2. Selector Multiplexers 1.6.5.2.3. Priority Multiplexers
1.6.6. Cyclic Redundancy Check Functions x
1.6.6.1. If Performance is Important, Optimize for Speed 1.6.6.2. Use Separate CRC Blocks Instead of Cascaded Stages 1.6.6.3. Use Separate CRC Blocks Instead of Allowing Blocks to Merge 1.6.6.4. Take Advantage of Latency if Available 1.6.6.5. Save Power by Disabling CRC Blocks When Not in Use 1.6.6.6. Initialize the Device with the Synchronous Load (sload) Signal
2. Recommended Design Practices x
2.1. Following Synchronous FPGA Design Practices 2.2. HDL Design Guidelines 2.3. Use Clock and Register-Control Architectural Features 2.4. Implementing Embedded RAM 2.5. Design Assistant Design Rule Checking 2.6. Recommended Design Practices Revision History
2.1. Following Synchronous FPGA Design Practices x
2.1.1. Implementing Synchronous Designs 2.1.2. Asynchronous Design Hazards
2.2. HDL Design Guidelines x
2.2.1. Considerations for the Hyperflex® FPGA Architecture 2.2.2. Optimizing Combinational Logic 2.2.3. Optimizing Clocking Schemes 2.2.4. Optimizing Physical Implementation and Timing Closure 2.2.5. Optimizing Power Consumption 2.2.6. Managing Design Metastability
2.2.2. Optimizing Combinational Logic x
2.2.2.1. Avoid Combinational Loops 2.2.2.2. Avoid Unintended Latch Inference 2.2.2.3. Avoid Delay Chains in Clock Paths 2.2.2.4. Use Synchronous Pulse Generators
2.2.3. Optimizing Clocking Schemes x
2.2.3.1. Register Combinational Logic Outputs 2.2.3.2. Avoid Asynchronous Clock Division 2.2.3.3. Avoid Ripple Counters 2.2.3.4. Use Multiplexed Clocks 2.2.3.5. Use Gated Clocks 2.2.3.6. Use Synchronous Clock Enables
2.2.3.5. Use Gated Clocks x
2.2.3.5.1. Recommended Clock-Gating Methods
2.2.4. Optimizing Physical Implementation and Timing Closure x
2.2.4.1. Planning Physical Implementation 2.2.4.2. Planning FPGA Resources 2.2.4.3. Optimizing for Timing Closure 2.2.4.4. Optimizing Critical Timing Paths
2.3. Use Clock and Register-Control Architectural Features x
2.3.1. Use Global Reset Resources 2.3.2. Use Global Clock Network Resources 2.3.3. Use Clock Region Assignments to Optimize Clock Constraints 2.3.4. Avoid Asynchronous Register Control Signals
2.3.1. Use Global Reset Resources x
2.3.1.1. Use Synchronous Resets 2.3.1.2. Using Asynchronous Resets 2.3.1.3. Use Synchronized Asynchronous Reset
2.3.3. Use Clock Region Assignments to Optimize Clock Constraints x
2.3.3.1. Clock Region Assignments in Stratix® 10 Devices 2.3.3.2. Clock Region Assignments in Arria® 10 and Older Device Families
2.5. Design Assistant Design Rule Checking x
2.5.1. Setting Up Design Assistant 2.5.2. Running Design Assistant During Compilation 2.5.3. Running Design Assistant in Analysis Mode 2.5.4. Cross-Probing from Design Assistant 2.5.5. Managing Design Assistant Rules 2.5.6. Design Assistant Rule Categories
2.5.1. Setting Up Design Assistant x
2.5.1.1. Design Assistant Rule Severity Levels
2.5.2. Running Design Assistant During Compilation x
2.5.2.1. Opening Design Assistant Rule Help
2.5.3. Running Design Assistant in Analysis Mode x
2.5.3.1. Launching Design Assistant from Chip Planner 2.5.3.2. Launching Design Assistant from Timing Analyzer
2.5.4. Cross-Probing from Design Assistant x
2.5.4.1. Cross-Probing from Design Assistant to Timing Analyzer 2.5.4.2. Cross-Probing from Design Assistant to Visualization Tools
2.5.5. Managing Design Assistant Rules x
2.5.5.1. Changing the Default Number of Violations per Rule 2.5.5.2. Enabling Rules for Specific Compiler Stages 2.5.5.3. Specifying Rule Parameters for a Specific Compiler Stage 2.5.5.4. Modifying Rule Severity Levels 2.5.5.5. Waiving Design Assistant Rules 2.5.5.6. Design Assistant Tags
2.5.5.5. Waiving Design Assistant Rules x
2.5.5.5.1. Creating Design Assistant Waivers 2.5.5.5.2. Design Assistant Waiver Dialog Box 2.5.5.5.3. Deleting Design Assistant Waivers 2.5.5.5.4. Design Assistant Waiver Tcl Commands 2.5.5.5.5. drc::add_waiver Command 2.5.5.5.6. drc::get_waivers Command 2.5.5.5.7. drc::report_waivers Command
3. Managing Metastability with the Quartus® Prime Software x
3.1. Metastability Analysis in the Quartus® Prime Software 3.2. Metastability and MTBF Reporting 3.3. MTBF Optimization 3.4. Reducing Metastability Effects 3.5. Scripting Support 3.6. Managing Metastability 3.7. Managing Metastability with the Quartus® Prime Software Revision History
3.1. Metastability Analysis in the Quartus® Prime Software x
3.1.1. Data Synchronization Register Chains 3.1.2. Identify Synchronizers for Metastability Analysis 3.1.3. How Timing Constraints Affect Synchronizer Identification and Metastability Analysis
3.2. Metastability and MTBF Reporting x
3.2.1. Metastability Reports 3.2.2. Synchronizer Data Toggle Rate in MTBF Calculation
3.2.1. Metastability Reports x
3.2.1.1. MTBF Summary Report 3.2.1.2. Synchronizer Summary Report 3.2.1.3. Synchronizer Chain Statistics Report in the Timing Analyzer
3.2.1.1. MTBF Summary Report x
3.2.1.1.1. Typical and Worst-Case MTBF of Design 3.2.1.1.2. Synchronizer Chains 3.2.1.1.3. Increasing Available Settling Time
3.3. MTBF Optimization x
3.3.1. Synchronization Register Chain Length
3.4. Reducing Metastability Effects x
3.4.1. Apply Complete System-Centric Timing Constraints for the Timing Analyzer 3.4.2. Force the Identification of Synchronization Registers 3.4.3. Set the Synchronizer Data Toggle Rate 3.4.4. Optimize Metastability During Fitting 3.4.5. Increase the Length of Synchronizers to Protect and Optimize 3.4.6. Increase the Number of Stages Used in Synchronizers 3.4.7. Select a Faster Speed Grade Device
3.5. Scripting Support x
3.5.1. Identifying Synchronizers for Metastability Analysis 3.5.2. Synchronizer Data Toggle Rate in MTBF Calculation 3.5.3. report_metastability and Tcl Command 3.5.4. MTBF Optimization 3.5.5. Synchronization Register Chain Length
Answers to Top FAQs
1. Recommended HDL Coding Styles
2. Recommended Design Practices
3. Managing Metastability with the Quartus® Prime Software
4. Quartus® Prime Pro Edition User Guide: Design Recommendations Archive
A. Quartus® Prime Pro Edition User Guides

2.3.2. Use Global Clock Network Resources

Intel FPGAs provide device-wide global clock routing resources and dedicated inputs. Use the FPGA’s low-skew, high fan-out dedicated routing where available.

By assigning a clock input to one of these dedicated clock pins or with an Quartus® Prime assignment to assign global routing, you can take advantage of the dedicated routing available for clock signals.

In an ASIC design, you must balance the clock delay distributed across the device. Because Intel FPGAs provide device-wide global clock routing resources and dedicated inputs, there is no need to manually balance delays on the clock network.

Limit the number of clocks in the design to the number of dedicated global clock resources available in the FPGA. Clocks feeding multiple locations that do not use global routing may exhibit clock skew across the device leading to timing problems. In addition, generating internal clocks with combinational logic adds delays on the clock path. Delay on a clock line can result in a clock skew greater than the data path length between two registers. If the clock skew is greater than the data delay, you violate the timing parameters of the register (such as hold time requirements) and the design does not function correctly.

FPGAs offer low-skew global routing resources to distribute high fan-out signals. These resources help with the implementation of large designs with multiple clock domains. Many large FPGA devices provide dedicated global clock networks, regional clock networks, and dedicated fast regional clock networks. These clocks are organized into a hierarchical clock structure that allows multiple clocks in each device region with low skew and delay. There are typically several dedicated clock pins to drive either global or regional clock networks, and both PLL outputs and internal clocks can drive various clock networks.

Stratix® 10 devices have a newer architecture. You can configure Stratix® 10 clocking resources to create efficiently balanced clock trees of various sizes, ranging from a single clock sector to the entire device. By default, the Quartus® Prime Software automatically determines the size and location of the clock tree. Alternatively, you can directly constrain the clock tree size and location either with a Clock Region assignment or by Logic Lock Regions.

To reduce clock skew in a given clock domain and ensure that hold times are met in that clock domain, assign each clock signal to one of the global high fan-out, low-skew clock networks in the FPGA device. The Quartus® Prime software automatically assigns global routing resources for high fan-out control signals, PLL outputs, and signals feeding the global clock pins on the device. To direct the software to assign global routing for a signal, turn on the Global Signal option in the Assignment Editor.

Note: Global Signal assignments only controls whether a signal is promoted using the specified dedicated resources or not, but does not control which or how many resources are used.

To take full advantage of the routing resources in a design, make sure that the sources of clock signals (input clock pins or internally-generated clocks) drive only the clock input ports of registers. In older Intel device families, if a clock signal feeds the data ports of a register, the signal may not be able to use dedicated routing, which can lead to decreased performance and clock skew problems. In general, allowing clock signals to drive the data ports of registers is not considered synchronous design and can complicate timing closure.

Level Two Title