INTEL DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH
WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH
WILL BE UNINTERRUPTED OR ERROR-FREE.

//****************************************************************
quartus-24.1-0.08-readme.txt
Readme file for Intel(R) Quartus(R) Prime 24.1 Patch 0.08
Copyright (C) Intel Corporation 2019 All right reserved.
Patch created on April 25, 2024, 9:17 p.m.
Patch Case#: 15015489282
Patches included: 
Patches conflicted: 
Patch prerequisites: 

//****************************************************************

Description:

Patch# 0.08: 
 Patch to fix bugs on:
1) Patch to provides Improvement on the IO timing models
KDB link: https://www.intel.com/content/www/us/en/support/programmable/articles/000098672.html
2) Patch to correctly set the reference clock mux for the TX PLL or CDR of GTS transceivers in Agilex™ 5 designs which enables HPS EMIF
KDB link:
https://www.intel.com/content/www/us/en/support/programmable/articles/000098675.html
3)  Patch to appropriately tie-off certain AXI signals to allow successful transactions across the F2H bridge
KDB Link:
https://www.intel.com/content/www/us/en/support/programmable/articles/000098815.html 




Caution - You must either have previously installed the
          Intel(R) Quartus(R) Prime 24.1 software or must
          install the Intel(R) Quartus(R) Prime 24.1 software
          before installing this patch. Otherwise, the patch will
          not be installed correctly and the Intel(R) Quartus(R) Prime
          software will not run properly.

Note:
<Patches included> - means this patch includes those patches. If you
    already installed those patches, you can safely install this new
    patch on top.
<Patches conflicted> - means this patch conflicts with those patches.
    If you have any of those patches installed, don't install this patch.
    Contact Intel for further support.